Mathematics, 24.12.2019 22:31 leapfroggiez

The manufacturer of hardness testing equipment uses steel-ball indenters to penetrate metal that is being tested, however, the manufacturer thinks it would be better to use a diamond indenter so that all ypes of metal can be tested. because of differences between the two types of indenters, it is suspected that the two methods will produce different hardness readings. the metal speciments to be tested are large enough so that two indentions can be made. therefore, the manufacturer uses both indenters on each specimen and compares the hardness readings. construct a 95% confidence interval to judge whether the two indenters resul in different measurements. note: a normal probability plot and boxplot indicate that the differences are approximately normally distributed with no outliers. specimen steel ball diamond1 51 532 57 553 61 634 70 745 68 696 54 567 65 688 51 519 53 56construct a 95% confidence interval to judge whether the two indenters result in different measurements, where the differences are computed as "diamond minus steel ball"the 95% confidence interval to judge whether the two indeners result in different measurements is?

Answers: 3

Show answers

Answers

Answer from: aliami0306oyaj0n

$1.667-2.31\frac{1.803}{\sqrt{9}}=0.2789$

$1.667+2.31\frac{1.803}{\sqrt{9}}=3.055$

So on this case the 95% confidence interval would be given by (0.2789;3.055)

The 95% confidence interval to judge whether the two indeners result in different measurements is?

Yes the confidence interval not contains the value 0 so we can conclude that the values for Diamond are significantly higher than the values for Steel Ball at 5% of significance.

Step-by-step explanation:

We have the following dataset:

specimen 1 2 3 4 5 6 7 8 9

Steel Ball 51 57 61 70 68 54 65 51 53

Diamond 53 55 63 74 69 56 68 51 56

If we calculate the differences diamond-steel ball we have this datase:

d: 2, -2, 2, 4, 1, 2, 3, 0, 3

The second step is calculate the mean difference

$\bar d= \frac{\sum_{i=1}^n d_i}{n}=1.667$

The third step would be calculate the standard deviation for the differences, and we got:

$s_d =\frac{\sum_{i=1}^n (d_i -\bar d)^2}{n-1} =1.803$

A confidence interval is "a range of values that’s likely to include a population value with a certain degree of confidence. It is often expressed a % whereby a population means lies between an upper and lower interval".

The margin of error is the range of values below and above the sample statistic in a confidence interval.

Normal distribution, is a "probability distribution that is symmetric about the mean, showing that data near the mean are more frequent in occurrence than data far from the mean".

The confidence interval for the mean is given by the following formula:

$\bar X \pm t_{\alpha/2}\frac{s}{\sqrt{n}}$ (1)

In order to calculate the critical value $t_{\alpha/2}$ we need to find first the degrees of freedom, given by:

df=n-1=9-1=8

Since the confidence is 0.95 or 95%, the value of $\alpha=0.05$ and $\alpha/2 =0.025$ , and we can use excel, a calculator or a table to find the critical value. The excel command would be: "=-T.INV(0.025,9)".And we see that $t_{\alpha/2}=2.31$ .

Now we have everything in order to replace into formula (1):

$1.667-2.31\frac{1.803}{\sqrt{9}}=0.2789$

$1.667+2.31\frac{1.803}{\sqrt{9}}=3.055$

So on this case the 95% confidence interval would be given by (0.2789;3.055)

The 95% confidence interval to judge whether the two indeners result in different measurements is?

Yes the confidence interval not contains the value 0 so we can conclude that the values for Diamond are significantly higher than the values for Steel Ball at 5% of significance.

Answer from: Quest

Intersecting secant-tangent theorem states that if a tangent segment and a secant segment are drawn to a circle from an exterior point, then the square of the measure of the tangent segment is equal to the product of the measures of the secant segment and its external secant segment.so to break it down: 1. pq acts as the tangent and ps as the secant with an intersection at p.sr = 21rp = 3x + 3pq = 4x + 4following to equation: tangent squared = the two segments multiplied by each otherso (4x + 4) ^ 2 = (3x + 3) • (21) simplifies to 16x^2 - 31x - 47 = 0 or (16x - 47)(x + 1) x = -1 or x = 47/162. pq acts as the tangent and ps as the secant with an intersection at p (again! )sr = 16rp = xpq = 15(15) ^ 2 = 16 • x225 = 16xx = 225/163. the interesting chords are proportional to each other so a ratio is possible to set up: ap dp 10 3 + x = = —— = pc pb 8 xcross multiple to get 10x = (3 + x)(8)x = 12

Answer from: Quest

l.jnl.j/n.m,lm,

step-by-step explanation:

Another question on Mathematics

Mathematics, 21.06.2019 21:20

Rose bought a new hat when she was on vacation. the following formula describes the percent sales tax rose paid b=t-c/c

Answers: 3

Answer

Mathematics, 21.06.2019 21:30

The perimeter of a rectangular lot of land is 436 ft. this includes an easement of x feet of uniform width inside the lot on which no building can be done. if the buildable area is 122 ft by 60 ft, determine the width of the easement. select one: a. 9 feet b. 18 feet c. 4.5 feet d. 7 feet

Answers: 3

Answer

Mathematics, 21.06.2019 23:30

Xy x xy if a and b are positive integers such that a*b=9 and b*a=72 what is the value of a/b

Answers: 3

Answer

Mathematics, 22.06.2019 00:00

Jessie and bob are financing $425,500 to purchase a house. they obtained a 30/8 balloon mortgage at 6.55%. what will their balloon payment be?

Answers: 3

Answer

You know the right answer?

The manufacturer of hardness testing equipment uses steel-ball indenters to penetrate metal that is...