Picture is here for A framing company is putting out a new product this summer. The width of the frame will be uniform all the way around. The designed frame will be cut out of a piece of steel, and to keep the weight down, the final area of the frame alone should be 100 cm2. The inside of the frame has to be 10 cm by 8 cm. What should the width x of the metal be?

Step-by-step explanation:

The shape of the frame(both inner and outer) is rectangular in nature.

Area of a rectangle = Length *Breadth

Since the width of the metal is x and the width of the frame will be uniform all the way around, then the length of the outer frame will be (x+8+x)cm and the breadth of the outer frame is (x+10+x)cm. Given the area of the outer frame to be 100cm², substituting this given parameters into the formula we have;

100 = (x+8+x) * (x+10+x)

100 = (2x+8)(2x+10)

100 = 4x²+20x+16x+80

4x²+36x-20 =0

Dividing through by 4 we have;

x²+9x-5 = 0

Using the general formula where a=1, b = 9, c = -5

x = -b±√b²-4ac/2a

x = -9±√9²-4(1)(-5)/2(1)

x = -9±√81+20/2

x = -9±√101/2

x = -9±10.05/2

x = -9+10.05/2 and -9-10.05/2

x = 1.05/2 and -19.05/2

x = 0.525 and -9.525

Choosing the positive width

x = 0.525cm

x ≈ 0.5cm

hi,

i'm 75% sure the answer is 1,1 to both lines.

have a great day

this is a very good question

step-by-step explanation:

i got a hair cut today from my mom not to flex just to flex kim jon un is one rad fellow i'd say you'd need to take the hairline in kinda like a box shape like someone rammed a lego brick into your head. from there you really need to take the top up keeping with that boxy aesthetic, finally coat the whole thing with gel if your country economics are failing or whatever you can just coat it with the starving children's food rations. about 5 orphans per strand is a good ratio. good luck with the fresh cut my dude