02:52:22 The graph represents the function where electricity usage
in kilowatts per hour of a clock radio varies directly with
the number of days it is plugged into the wall current.
Which is a reasonable estimate of the constant of
variation?
Clock Radio Electricity Usage
4.5
0.25 kWh per day
0.50 kWh per day
2.40 kWh per day
4.00 kWh per day
4
5
3
Electricity Usage (kWh)
2.5
2
1.5 +
1 +
0.5 +
2
4
1
3
8 9
5
6 7
Sube
leat
Save and Exit
Mark this and return

part a

answer: a reasonable domain is where n is a real number. so n can be between 0 and 10. both endpoints are included.

work shown:

n is the number of days after the experiment starts. the smallest n can be is n = 0 which means that 0 days have gone by, and we're at the start. to find out how large n should be, then replace f(n) with 16.13 and solve for n. use logarithms to isolate the exponent.

f(n) = 12*(1.03)^n

16.13 = 12*(1.03)^n

16.13/12 = (1.03)^n

1.34416666666667 = (1.03)^n

(1.03)^n = 1.34416666666667

log[ (1.03)^n ] = log[ 1.34416666666667 ]

n*log[ 1.03 ] = log[ 1.34416666666667 ]

n = log[ 1.34416666666667 ]/log[ 1.03 ]

n = 10.0062999823929

this rounds to n = 10 which is fairly close but not 100% perfect. so this is the largest n can be.

note: if you plug n = 10 into f(n), you'll get roughly 16.127 which rounds to 16.13 (this comes up again in part c)

=====================================

part b

answer: the y intercept is 12. it represents the starting height of the plant in cm.

work shown:

plug n = 0 into the f(n) function. simplify

f(n) = 12*(1.03)^n

f(0) = 12*(1.03)^0

f(0) = 12*(1)

f(0) = 12

on day n = 0, aka the starting point, the height f(n) is 12 cm

=====================================

part c

answer: the average rate of change is approximately 0.43061036458991 (round however you need to). this represents the average growth rate from day n = 3 to day n = 10. so the plant grew roughly 0.43 cm per day during this timespan, assuming you round to 2 decimal places.

work shown:

compute f(3)

f(n) = 12*(1.03)^n

f(3) = 12*(1.03)^3

f(3) = 13.112724 < we'll use this later

compute f(10)

f(n) = 12*(1.03)^n

f(10) = 12*(1.03)^10

f(10) = 16.1269965521294 < we'll use this later

now use the formula below with a = 3 and b = 10

aroc = average rate of change

aroc = [ f(b) - f(a) ]/[ b - a ]

aroc = [ f(10) - f(3) ]/[ 10 - 3 ]

aroc = (16.1269965521294 - 13.112724)/(10 - 3)

aroc = 3.0142725521294/7

aroc = 0.43061036458991

round this however you need to

note: the plant grew approximately 3.01 cm over 7 days, so roughly 0.43 cm per day is the average growth rate (if you were to round to 2 decimal places).

so the possibilities of the measurement of the side of the triangle are either it is longest side or not the longest side

when it is the longest side

s < 25 + 35s < 60

if it is not the longest side

35 < 25 + s10 < sso 10 < s < 60so the perimeter70 < p < 130

hi there

the slope is 1/3.

this is because from the y-intercept, you go up one, and you go to the right three, to get to the next exact point on the graph. this is known at the “rise over run.”

p.s. (if you need it).your y-intercept is -2, because that is the point on the graph where the line crosses the y-axis.

hope that : )