You work in a machine design department and need to specify the diameter of a pin that slides back and forth through a hole. The hole diameter is specified as 0.500 inch with a tolerance of 0.010 inch. The maximum pun diameter must be 0.002 inch smaller than the minimum hole diameter. If the pin diameter has a tolerance of 0.010 inch what diameter in inches should you specify for the pin?

spinning a 1, 2, or 3. option d.

step-by-step explanation: when spinning a number graph up to 4, and aiming for any number less than 3, that automatically eliminates the number 4. now you have two numbers to spin on that are less than 3, but the number 3 is included in this question because it's no greater of an number than itself. i hope this you : )

mk./km: lm

step-by-step explanation:

,mlmlm

; mk

lk

step-by-step explanation:

there are 36 inches in a yard

25 : 36 = 0.69 yards (you can round to 0.70)

ca = ec

cpctc makes it so that corresponding parts of the triangle you proved to be equal are equal, the other options aren't part of the part of the triangles you proved to be equal.