A ladder leans against a vertical at angle of 60° to the wall of the foot of the ladder is 5m away from the wall calculate the length of the ladder

Your question indicates the ladder is at an angle of 60° to the wall, meaning the angle between the wall and the ladder is 60° and the angle between the ladder and the ground must be 30°. Not a very efficient way to set up a ladder.

5.7735 meters. The top of the ladder is 2.8868 meters off the ground.

Now, if you meant the ladder is 60° from the ground, that’s a different story.

Then, the ladder is 10 meters long and reaches 8.6603 meters from the ground.

A 30–60–90 right triangle is half of an equalateral triangle. Therefore the hypotenuse is double the length of the short leg, and by the Pythagorean theorum, we can determine that the other leg is the length of the short leg times the square root of 3.

All lengths in this answer are rounded to the nearest tenth of a millimeter.

Step-by-step explanation:

a. 19,958,400

step-by-step explanation:

hope this

when functions are first introduced, you will probably have some simplistic "functions" and relations to deal with, usually being just sets of points. these won't be terribly useful or interesting functions and relations, but your text wants you to get the idea of what the domain and range of a function are. small sets of points are generally the simplest sorts of relations, so your book starts with those.

step-by-step explanation:

state the domain and range of the following relation. is the relation a function?

{(2, –3), (4, 6), (3, –1), (6, 6), (2, 3)}

the above list of points, being a relationship between certain x's and certain y's, is a relation. the domain is all the x-values, and the range is all the y-values. to give the domain and the range, i just list the values without duplication:

domain: {2, 3, 4, 6}

range: {–3, –1, 3, 6}

(it is customary to list these values in numerical order, but it is not required. sets are called "unordered lists", so you can list the numbers in any order you feel like. just don't duplicate: technically, repetitions are okay in sets, but most instructors would count off for this.)

while the given set does indeed represent a relation (because x's and y's are being related to each other), the set they gave me contains two points with the same x-value: (2, –3) and (2, 3). since x = 2 gives me two possible destinations (that is, two possible y-values), then this relation is not a function.

note that all i had to do to check whether the relation was a function was to look for duplicate x-values. if you find any duplicate x-values, then the different y-values mean that you do not have a function. remember: for a relation to be a function, each x-value has to go to one, and only one, y-value.

state the domain and range of the following relation. is the relation a function?

{(–3, 5), (–2, 5), (–1, 5), (0, 5), (1, 5), (2, 5)}

i'll just list the x-values for the domain and the y-values for the range: