When requirements for high reliability make redundancy necessary, a good arrangement has one unit operating until it fails. At that time, a second unit, which has been idly standing by is switched on. The overall reliability of such a system, typically referred to as a standby system, is generally higher than the reliability of an equivalent parallel system in which both units operate simultaneously. A two-unit standby system functions successfully when the functioning unit does not fail, or if the functioning unit fails during operating time t, the sensing/switching unit functions properly, and the standby unit (not having failed while idle) functions properly for the remainder of the mission. Assuming 100% reliabilities of the sensing/switching unit and the second unit while idling, the reliability of the system is the probability that unit 1 succeeds for the whole period t or that unit 1 fails at some time t1 prior to t and unit 2 successfully functions for the remainder of the mission. If the failure rates for the first and second units are lambda1 and lambda2, respectively, determine the system reliability as a function of time for the following two cases: lambda1 =/= lambda2 and lambda1 = lambda2. For the case where lambda1 = lambda2, determine the mean time to failure and compare your result with the mean time to failure of a parallel system with two redundant components. Comment on the results.