Alexander uses cupric chloride to etch circuit boards. He recorded the room temperature, in ^\circ\text{C} ∘ Cdegrees, start text, C, end text, and the etching rate, in \dfrac{\mu\text{m}}{\text{min}} min μm ​ start fraction, mu, start text, m, end text, divided by, start text, m, i, n, end text, end fraction, of the cupric chloride. After plotting his results, Alexander noticed that the relationship between the two variables was fairly linear, so he used the data to calculate the following least squares regression equation for predicting the etching rate from the room temperature: \hat y = 2 +\dfrac{1}{5} x y ^ ​ =2+ 5 1 ​ xy, with, hat, on top, equals, 2, plus, start fraction, 1, divided by, 5, end fraction, x What is the residual if the room temperature was 25^\circ\text{C}25 ∘ C25, degrees, start text, C, end text and the cupric chloride had an etching rate of 5\dfrac{\mu\text{m}}{\text{min}}5 min μm ​ 5, start fraction, mu, start text, m, end text, divided by, start text, m, i, n, end text, end fraction ?

∠1≅∠2 by the alternate exterior angles theorem.

step-by-step explanation:

given, a ∥ b and ∠1 ≅ ∠3 .we have to prove that e ∥ f

we know that ∠1≅∠3 and that a || b because they are given. we see that by the alternate exterior angles theorem. therefore, ∠2≅∠3 by the transitive property. so, we can conclude that e || f by the converse alternate exterior angles theorem.

we have to fill the missing statement.

transitivity property states that if a = b and b = c, then a = c.

now, given ∠1≅∠3 and by transitivity property ∠2≅∠3 .

hence, to apply transitivity property one angle must be common which is not in result after applying this property which is ∠1.

the only options in which ∠1 is present are ∠1 and ∠2, ∠1 and ∠4

∠1 and ∠4 is not possible ∵ after applying transitivity we didn't get ∠4.

hence, the missing statement is ∠1≅∠2.

so, ∠1≅∠2 by the alternate exterior angles theorem.

the anwser is d) 75°

step-by-step explanation:

answer: ratio of volume of cone (with 3 times the height and equal diameter) to volume of cylinder is 2 to 1. the value of π is not used.

step-by-step explanation:

radius is diameter/2 = 4.

area of circle is π r^2.

volume of cylinder is height × area of base = hπr^2 = 3(4^2) π = 48π cubic inches.

not knowing the formula for volume of cone, i calculate it using calculus (which is for calculating things).

volume of cone is integral 0 to h area(y) dy. area(y) is π r(y)^2. r(y) runs r to zero as y runs zero to h, r(0) = r, r(h) = 0.

r(y) = r - r/h y

area(y) = π (r - r/h y)^2 = π (r^2 - 2r^2y/h + r^2y^2/h^2) = π r^2(1-2y/h+y^2/h^2)

antiderivative area(y) = π r^2 (y-y^2/h+y^3/(3h^2))

integral 0 to h = π r^2(h-h^2/h+h^3/(3h^2) - (0)) = π r^2(h - h + h/3) = π r^2(h/3) = π/3 r^2 h

volume of this cone is π/3(4^2)18 cubic inches.

= 6 16 π = 96π cubic inches.

cone has twice the volume, 96/48.

cone height is 6 times the cylinder.

ratio of volume formula: π r^2 cancels.

cone over cylinder ratio is 6h/3 to h, 2 to 1.

take the logarithm of both sides (the base of the log doesn't matter):

apply the exponent property - this says that :

distribute the log terms on both sides:

group like terms together:

divide through both sides by the coefficient on :

you can do some additional rewriting here using the properties of the logarithm to simplify things if you like: