Compare the dimensions of the prisms. How many times greater is the surface area of the red prism than the surface area of the blue prism? WHOEVER ANSWERS CORRECTLY I WILL MARK BRANLIEST

(0,-3) see attached graph

step-by-step explanation:

a. to solve the system, graph the two equations.

x = y+3 becomes y=x-3 has m=1/1 and b=-3. start at (0,-3) on the y-axis and plot a point. then move up 1 unit and 1 unit to the right. plot a point and connect.

y=-4x+3 has m =-4/1 and b=-3. start at (0,-3) on the y-axis and plot a point. then move down four units and to the right 1 unit. plot a point and connect.

the solution is the point (x,y) where the two lines intersect. by the graph below it is (0,-3).

b. to solve by substitution, substitute y = -4x-3 into x= y+3

x= (-4x-3) +3

x=-4x

5x=0

x=0

now substitute x = 0 back in to find y.

y= -4(0)-3

y=0-3

y=-3

solution is (0,-3)

c. use elimination by adding the equations together.

x-y=3

4x+y=-3

5x=0

x=0

then substitute into one equation to find y.

y=-4(0)-3

y=-3

is there any photos or whatever?

part a

answer: a reasonable domain is where n is a real number. so n can be between 0 and 10. both endpoints are included.

work shown:

n is the number of days after the experiment starts. the smallest n can be is n = 0 which means that 0 days have gone by, and we're at the start. to find out how large n should be, then replace f(n) with 16.13 and solve for n. use logarithms to isolate the exponent.

f(n) = 12*(1.03)^n

16.13 = 12*(1.03)^n

16.13/12 = (1.03)^n

1.34416666666667 = (1.03)^n

(1.03)^n = 1.34416666666667

log[ (1.03)^n ] = log[ 1.34416666666667 ]

n*log[ 1.03 ] = log[ 1.34416666666667 ]

n = log[ 1.34416666666667 ]/log[ 1.03 ]

n = 10.0062999823929

this rounds to n = 10 which is fairly close but not 100% perfect. so this is the largest n can be.

note: if you plug n = 10 into f(n), you'll get roughly 16.127 which rounds to 16.13 (this comes up again in part c)

=====================================

part b

answer: the y intercept is 12. it represents the starting height of the plant in cm.

work shown:

plug n = 0 into the f(n) function. simplify

f(n) = 12*(1.03)^n

f(0) = 12*(1.03)^0

f(0) = 12*(1)

f(0) = 12

on day n = 0, aka the starting point, the height f(n) is 12 cm

=====================================

part c

answer: the average rate of change is approximately 0.43061036458991 (round however you need to). this represents the average growth rate from day n = 3 to day n = 10. so the plant grew roughly 0.43 cm per day during this timespan, assuming you round to 2 decimal places.

work shown:

compute f(3)

f(n) = 12*(1.03)^n

f(3) = 12*(1.03)^3

f(3) = 13.112724 < we'll use this later

compute f(10)

f(n) = 12*(1.03)^n

f(10) = 12*(1.03)^10

f(10) = 16.1269965521294 < we'll use this later

now use the formula below with a = 3 and b = 10

aroc = average rate of change

aroc = [ f(b) - f(a) ]/[ b - a ]

aroc = [ f(10) - f(3) ]/[ 10 - 3 ]

aroc = (16.1269965521294 - 13.112724)/(10 - 3)

aroc = 3.0142725521294/7

aroc = 0.43061036458991

round this however you need to

note: the plant grew approximately 3.01 cm over 7 days, so roughly 0.43 cm per day is the average growth rate (if you were to round to 2 decimal places).