A pump system depends on a single power supply and three pumps (one powerful pump and two less powerful pumps). The system functions normally using the power supply and the powerful pump. If the powerful pump fails, the system still functions if the power supply and the two less powerful pumps are operational. If the power supply fails, a manual operator can operate any one of the three pumps so that the system functions. Use the following notation: A: power supply B: powerful pump C: less powerful pump D: less powerful pump O: operator The probabilities of component failure (per year) are as follows: PIA) = 0.001 P(B)= 0.01 P(C)=P(D) 0.005 P(O)=0.002 a. Draw a function block diagram of the pump system. b. Draw a fault tree of the pump system. C. What is the probability of the system failing? (use minimum cut sets) d. Let E represent the event of a power outage, where P(E)=0.01. If a power outage were to occur, what is the probability of failure of A? e. Assume that, given a power outage event, the probability of failure of all pumps increases by a factor of 50 (e. g., P(BE)=50*P(B)), while the operator will still deliver a reliable service. Assuming that the probability of failure given no event are identical to the unconditional probabilities, how much would the probability of system failure be?

step-by-step explanation: i dont

part a

answer: a reasonable domain is where n is a real number. so n can be between 0 and 10. both endpoints are included.

work shown:

n is the number of days after the experiment starts. the smallest n can be is n = 0 which means that 0 days have gone by, and we're at the start. to find out how large n should be, then replace f(n) with 16.13 and solve for n. use logarithms to isolate the exponent.

f(n) = 12*(1.03)^n

16.13 = 12*(1.03)^n

16.13/12 = (1.03)^n

1.34416666666667 = (1.03)^n

(1.03)^n = 1.34416666666667

log[ (1.03)^n ] = log[ 1.34416666666667 ]

n*log[ 1.03 ] = log[ 1.34416666666667 ]

n = log[ 1.34416666666667 ]/log[ 1.03 ]

n = 10.0062999823929

this rounds to n = 10 which is fairly close but not 100% perfect. so this is the largest n can be.

note: if you plug n = 10 into f(n), you'll get roughly 16.127 which rounds to 16.13 (this comes up again in part c)

=====================================

part b

answer: the y intercept is 12. it represents the starting height of the plant in cm.

work shown:

plug n = 0 into the f(n) function. simplify

f(n) = 12*(1.03)^n

f(0) = 12*(1.03)^0

f(0) = 12*(1)

f(0) = 12

on day n = 0, aka the starting point, the height f(n) is 12 cm

=====================================

part c

answer: the average rate of change is approximately 0.43061036458991 (round however you need to). this represents the average growth rate from day n = 3 to day n = 10. so the plant grew roughly 0.43 cm per day during this timespan, assuming you round to 2 decimal places.

work shown:

compute f(3)

f(n) = 12*(1.03)^n

f(3) = 12*(1.03)^3

f(3) = 13.112724 < we'll use this later

compute f(10)

f(n) = 12*(1.03)^n

f(10) = 12*(1.03)^10

f(10) = 16.1269965521294 < we'll use this later

now use the formula below with a = 3 and b = 10

aroc = average rate of change

aroc = [ f(b) - f(a) ]/[ b - a ]

aroc = [ f(10) - f(3) ]/[ 10 - 3 ]

aroc = (16.1269965521294 - 13.112724)/(10 - 3)

aroc = 3.0142725521294/7

aroc = 0.43061036458991

round this however you need to

note: the plant grew approximately 3.01 cm over 7 days, so roughly 0.43 cm per day is the average growth rate (if you were to round to 2 decimal places).

proofs involving isosceles triangles often require special consideration because an isosceles triangle has several distinct properties that do not apply to normal triangles.(more about triangle types) therefore, when you are trying to prove that two triangles are congruent, and one or both triangles, are isosceles you have a few theorems that you can use to make your life easier.

step-by-step explanation:

an isosceles triangle has two congruent sides and two congruent angles. the congruent angles are called the base angles and the other angle is known as the vertex angle. ∠bac and ∠bca are the base angles of the triangle picture on the left. the vertex angle is ∠abc