Describe a situation that could be modeled whit the ratio 4:1

when rotating a figure 180 degrees, imagine that you are able to take the figure and turn it clockwise or counterclockwise around a center point. to rotate a figure 180 degrees, you will need to apply the rule (x, y) → (-x, -y). start by using a coordinate grid with coordinates for each vertex of the figure. the center point of the coordinate grid is located at (0, 0), which is what you will rotate the figure around. write down the original coordinates of the shape you are going to rotate. then, apply the rule. for example, coordinate (1, 2) becomes (-1, -2). another example would be, coordinate (-4, -2) becoming (4, 2). after you change each original coordinate to the rotated coordinate, you will draw your new figure.

step-by-step explanation:

look at photo

hi there!

step-by-step explanation:

a roof pitch is basically for every inch rise there is 12 inches run.

the height of the roof is also known as the rafter.

formula: rafter^2 = rise^2 + run^2

rafter^2 = 5^2 + 12^2

rafter^2 = 25 + 144

rafter ^2 = 169"^2

the height of the roof from the lowest point to the highest point is 169"^2.

hope this : )