You are making a 568b utp crossover cable that will be used to cascade two switches on an ethernet network. you have attached an rj-45 connector to one end of the cable and inserted the white with orange stripe wire into pin 1 of the connector. the orange wire has been inserted into pin 2 of the connector. which wire should be inserted into pin 1 of the rj-45 connector on the other end of the cable?

For a 568B crossover cable that already has wht-org and org on pins 1 and 2 of the connector at one end, the connector at the OTHER end should have wht-grn and grn on pins 1 and 2 respectively.

The wht-org and org at that end should drop to pins 3 and 6 respectively.

You're welcome, and good luck.

in simple terms, the principle states that the buoyancy force on an object is equal to the weight of the fluid displaced by the object, or the density of the fluid multiplied by the submerged volume times the gravitational acceleration, g. this is also known as upthrust.

see earlier answer