Physics, 11.07.2019 08:00 YoVeoAnime

Block a has a mass 1.0 kg and block b has a mass 3.0 kg. the two blocks are connected by a very light rope of negligible mass that passes over a pulley as shown. the coefficient of kinetic friction for the blocks on the ramp is 0.33. the ramp is angled at  = 45. at time t = 0 s, block a is released with an initial speed of 6.0 m/s. what is the tension in the rope?

Answers: 1

Show answers

Another question on Physics

Physics, 22.06.2019 07:30

Select all of the following that are equal to an impulse of 20 unitsa) force= 5, time= 5.5b) force= 25, time= 0.8c) force= 0.1, time= 200d) force= 10, time= 2(its b, c, and d)(also in order to find answer they have to add to get the unit)ex= 25x.8=20 or .1x200=20

Answers: 1

Answer

Physics, 22.06.2019 16:30

The air in an automobile tire with a volume of 2.60 ft3 is at 70°f and 21 psig. determine the amount of air that must be added to raise the pressure to the recommended value of 30 psig. assume the atmospheric pressure to be 14.6 psia and the temperature and the volume to remain constant. the gas constant of air is ru = 53.34ft⋅lbflbm⋅r(1 psia144 lbf/ft2) = 0.3704 psia⋅ft3lbm⋅r the amount of air that must be added to raise the pressure is lbm

Answers: 3

Answer

Physics, 22.06.2019 17:40

The weights of bags filled by a machine are normally distributed with a standard deviation of 0.05 kilograms and a mean that can be set by the operator. at what level should the mean weight be set if it required that only 1% of the bags weigh less than 9.5 kilograms? round the answer to 2 decimal places.

Answers: 1

Answer

Physics, 22.06.2019 19:30

Refrigerant-134a flows through a carnot heat pump cycle at 0.5 kg/s. it is known that the maximum absolute temperature in the cycle is 1.1 times the minimum absolute temperature, and the net power input to the cycle is 2.5 kw. if the refrigerant changes from a saturated vapor to a saturated liquid during the heat rejection process, determine the maximum magnitude of the enthalpy of vaporization for this process in kj/kg (with 3 significant figures).

Answers: 3

Answer

You know the right answer?

Block a has a mass 1.0 kg and block b has a mass 3.0 kg. the two blocks are connected by a very ligh...

Questions