The large container shown in the cross section above is filled with a liquid of density 1.1 x 103 kg/m3 . a small hole of area 2.5 x 10-6 m2 is opened in the side of the container a distance h below the liquid surface, which allows a stream of liquid to flow through the hole and into a beaker placed to the right of the container. at the same time, liquid is also added to the container at an appropriate rate so that h remains constant. the amount of liquid collected in the beaker in 2.0 minutes is 7.2 x 10-4 m3 . a. calculate the volume rate of flow of liquid from the hole in m3/s . b. calculate the speed of the liquid as it exits from the hole. c. calculate the height h of liquid needed above the hole to cause the speed you determined in part (b). d. suppose that there is now less liquid in the container so that the height h is reduced to h/2. in relation to the beaker, where will the liquid hit the tabletop? left of the beaker in the

Clothing made of several thin layers of fabric with trapped air in between, often called ski clothing, is commonly used in cold climates because it is light, fashionable, and a very effective thermal insulator. so it is no surprise that such clothing has largely replaced thickand heavy old-fashioned coats. (a) consider a jacket made of five layers of 0.1-mm-thick synthetic fabric (k = 0.13 w/m·°c) with 1.5-mm-thick air space (k = 0.026 w/m·°c) between the layers. assuming the inner surface temperature of the jacket to be 28°c and the surface area to be 1.25 m2, determine the rate of heat loss through the jacket when the temperature of the outdoors is 0°c and the heat transfer coefficient at the outer surface is 25 w/m2·°c. (b) what would your response be if the jacket is made of a single layer of 0.5-mm-thick synthetic fabric? what should be the thickness of a wool fabric (k = 0.035 w/m·°c) if the person is to achieve the same level of thermal comfort wearing a thick wool coat instead of a five-layer ski jacket?

A2.0 μf capacitor and a 4.0 μf capacitor are connected in series across a 0.827-kv potential. the charged capacitors are then disconnected from the source and connected to each other with terminals of like sign together. find the voltage across each capacitor.

Charge is distributed along the entire x-axis with uniform density λ. how much work does the electric field of this charge distribution do on an electron that moves along the y-axis from y = a to y = b? (use the following as necessary: a, b, ε0, λ, and q for the charge on an electron.)