subject
Physics, 08.07.2019 17:00 keely8468

Describe possible instrumental error

ansver
Answers: 1

Another question on Physics

question
Physics, 21.06.2019 20:00
How much force must a locomotive exert on a 12840-kg boxcar to make it accelerate forward at 0.490 m/s2?
Answers: 1
question
Physics, 21.06.2019 23:30
Classify the following soils according to the uscs classification system. provide appropriate uscs designations. a) this sample of well-graded gravel with sand was obtained from a large earthen dam in vancouver, canada. the sample has 73% fine to coarse sub-angular gravel, 25% fine to coarse sub-angular sand and 2% fines. the maximum size of the particles is 75 mm. the coefficient of curvature is 2.7, while the uniformity coefficient is 12.4. b) this dark brown and wet soil with a “strong organic odor” has 100% passing the no. 200 sieve. the liquid limit of the material is 32% when not dried and is 21% when oven-dried. the plastic index is 21% when not dried. c) this sand has 61% predominantly fine sand, 23% silty fines, and 16% fine sub-rounded gravel size. the maximum size is 20 mm. the liquid limit is 33% and the plastic limit is 27%. d) this soil has 74% fine to coarse sub-angular reddish sand and 26% organic and silty dark brown fines. the liquid limit is 37% when not dried and is 26% when oven dried. the plastic index is 6% when not dried.
Answers: 1
question
Physics, 22.06.2019 21:40
Wo small variable-thrust jets are actuated to keep the spacecraft angular velocity about the z-axis constant at ? 0 = 1.16 rad/s as the two telescoping booms are extended from r1 = 1.18 m to r2 = 4.69 m at a constant rate over a period of 124 seconds. the small 19-kg experiment modules at the ends of the booms may be treated as particles, and the mass of the rigid booms is negligible. determine the necessary thrust t for each jet as a function of time where t = 0 is the time when the telescoping action is begun. after you have the general expression for t, answer the questions. show work.
Answers: 1
question
Physics, 23.06.2019 01:30
When a lead acid car battery is recharged by the alternator, it acts essentially as an electrolytic cell in which solid lead(ii) sulfate is reduced to lead at the cathode and oxidized to solid lead(ii) oxide at the anode. suppose a current of is fed into a car battery for seconds. calculate the mass of lead deposited on the cathode of the battery.
Answers: 3
You know the right answer?
Describe possible instrumental error...
Questions
question
Chemistry, 15.12.2020 19:30
question
German, 15.12.2020 19:30
question
Social Studies, 15.12.2020 19:30
question
Mathematics, 15.12.2020 19:30
question
Mathematics, 15.12.2020 19:30
Questions on the website: 13722361