subject
Physics, 07.07.2019 13:00 prettydoll19

An 1.0 kg mass book, initially at rest, is supported against a vertical wall, being pressed by a horizontal force of f 50 n module, as indicated in the figure. the acceleration of gravity has a modulus of 10.0m / s, the coefficient of static friction between the wall surface and the book is 0.25 and the coefficient of kinetic friction 0.20. mark the correct statement. a) the book slides along the wall and the modulus of the friction force is 10.0 n b) the book remains at rest and the module of the normal force of contact between the book is the wall is 10n c) the book remains at rest and the modulus of frictional force between the book and the wall is 12.5n. d) the book remains at rest and the modulus of frictional force between the book and the wall is 10 n e) the book slides along the wall and the module friction force is 12.5 n.

ansver
Answers: 1

Another question on Physics

question
Physics, 22.06.2019 11:30
1. a camcorder has a power rating of 19 watts. if the output voltage from its battery is 7 volts, what current does it use?answer units 2. a 1.5m wire carries a 6 a current when a potential difference of 57 v is applied. what is the resistance of the wire? yourunits 3. a clothes dryer uses about 2 amps of current from a 240 volt line. how much power does it use? yourunits 4.
Answers: 1
question
Physics, 22.06.2019 12:00
Asolid round steel rod 6.25 mm in diameter and 375 mm long is rigidly bonded to the end of solid square brass rod 25 mm on a side and 300 mm long. the geometric axes of the bare are along the same line. an axial tensile force of 5.4 kn is applied at the extreme ends of the assembly. for steel e = 200 gpa and for brass e = 90 gpa. determine the total elongation for the assembly.
Answers: 1
question
Physics, 22.06.2019 17:30
Alarge cruise ship of mass 7.00 ✕ 107 kg has a speed of 11.6 m/s at some instant. (a) what is the ship's kinetic energy at this time? (b) how much work is required to stop it? (give the work done on the ship. include the sign of the value in your answer.) (c) what is the magnitude of the constant force required to stop it as it undergoes a displacement of 3.00 km?
Answers: 2
question
Physics, 22.06.2019 17:30
Aparticle moves in a circle 1.50 m in radius . through what angle in radians does it rotate if it moves through an arc length of 2.50m? what is the angle in degrees?
Answers: 1
You know the right answer?
An 1.0 kg mass book, initially at rest, is supported against a vertical wall, being pressed by a hor...
Questions
Questions on the website: 13722359