Humans sleep in cycles, usually two or three cycles per night. there is a point in each cycle when waking up will leave the sleeper feeling the most rested and refreshed. after learning about this, a computer programmer designed a new smartphone alarm clock. this new alarm clock uses sensors in the smartphone to detect the sleeper’s motion and determine when the sleeper has reached the best point in the sleep cycle at which to wake up. the app can be downloaded onto any smartphone. most users who download this app find that it does not them wake up feeling more refreshed, but they are willing to try improved products in the future. which criterion did this sleep cycle alarm clock fail to meet? it did not solve the problem. it was not cost effective enough. it was not readily available. it was not safe for most users.

Aroll in a paper machine is powered by a separately excited dc machine. operating point 1 (under load): the roll typically operates at 764 rpm and must provide 301 nm of torque to oppose the load of the paper. the armature voltage is 230v for this operating point operating point 2 (no load): when the load is removed the speed of the roll increases to 900 rpm (the field characteristics are unchanged) la ea dev m (a) calculate the maximum torque (units of nm) that the motor can supply with this applied voltage (b) calculate the value of the armature resistance, ra (in ohms) (c) at operating point 1 (loaded condition), the field current, i, and the total input power (armature field), are measured to be to be 10 a and 28,600 w respectively. use this information to calculate the value of the field resistance, rf (in ohms). (d) (d) at operating point 1 (loaded condition), calculate the motor efficiency. express your answer as a percent to at least 2 significant digits. (d) if the field voltage is reduced by 1/2, calculate the new stall torque (in nm) of the motor (f). if the field voltage is reduced by 1/2, calculate the new no-load speed (in rad/sec)

Abeam of electrons with of wavelength of 7.5 x 10-6 m is incident on a pair of narrow rectangular slits separated by 0.75 mm. the resulting interference pattern is projected onto a screen 10.0 m from the slits. what is the separation of the interference maxima in the resulting interference pattern?

Acup of coffee sits on the dashboard of an automobile. the car goes around a sharp curve. even though you hold the cup still, coffee still splashes out. this can best be explained due to a) density. b) friction. c) gravity. d) inertia.