Arace car has a mass of 710kg. it starts from rest and travels 40.0m is 3.0s. the car is uniformly accelerated during this time. what bet force is acting on the car?

A23 kg log of wood begins from rest, 300 m up a sluice (a water track used to transport logs, think of it as an inclined plane with negligible friction) inclined at 20° to the horizontal. after it reaches the flat waterway at the bottom it collides elastically with a 100 kg block of wood initially at rest near the base of the incline. (a) how long does it take the 23 kg log to travel down the incline? (b) what is the speed of the 23 kg log at the bottom of the incline? (c) what are the velocities of both blocks of wood after the collision? (d) what is the total kinetic energy before the collision? (e) what is the kinetic energy of the 23 kg log after the collision? (f) what is the kinetic energy of the 100 kg block of wood after the collision? (g) what is the total kinetic energy after the collision? (h) compare the total initial and total final kinetic energies. is this consistent with what you would expect for elastic collisions? explain!

Two horizontal plates with infinite length and width are separated by a distance h in the z direction. the bottom plate is moving at a velocity u. the incompressible fluid trapped between the plates is moving in the positive x-direction with the bottom plate. align gravity with positive z. assume that the flow is fully-developed and laminar. if the systems operates at steady state and the pressure gradient in x-direction can be ignored, do the following: 1. sketch your system 2. identify the coordinate system to be used. 3. show your coordinates and origin point on the sketch. list all your assumptions. 5. apply the continuity equation to your system. nts of navier stokes equations of choice to your system 7. solve the resulting differential equation to obtain the velocity profile within the system make sure to list your boundary conditions. check units of velocity 8. describe the velocity profile you obtain using engineering terminology. sketch that on the same sketch you provided in (1). 9. obtain the equation that describes the volumetric flow rate in the system. check the units.

You have been consulted by the mobile phone company hookup about a new augmented reality product called “brows”. they want to develop an alternative to google glasses, which, you recall, is a proposed new product which plans to superimpose a whole range of wireless google services over the user’s ordinary vision of the world. these appear in little circles and ovals, and let you phone people, take photographs, navigate across cities and inside buildings, find shops and update your social media. brows would do this too, but not be limited to special google services. the user would wear a small cylinder-shaped device designed to fit on top of their existing eyewear (glasses or sunglasses). it would project a reversed image onto the inside of the lenses, the reflection of which would be in focus for the user. instead of voice control, the user would control the device by eye and neck movements, which the device would track. the device would connect via bluetooth to the user’s phone, which would supply most of the computing power and wireless connectivity. hookup also wants to know what existing services would be most in demand, and which would not work well with brows. using your knowledge of augmented reality, wearable technology and interface design, is the project feasible? if not, why not? if feasible, how could the product need to be modified for a better experience?