The volumes of a sample of lead and a sample of platinum are the same: 2 cm3. the density of lead is 11.3 g/cm3 and the density of platinum is 21.5 g/cm3. which is an accurate description of their relative masses? a. the masses of the lead and platinum samples are the same. b. the mass of the lead sample is greater than the mass of the platinum sample. c. the mass of the platinum sample is greater than the mass of the lead sample.

In a series circuit the __ is the same at every point

Use the profile illustrated for problem (1). assume that the layer of silty sand fill (sm) is placed over the entire site. estimate the thickness of the fill (h - in feet) that will cause the effective vertical stress at the center of the clay layer to increase by 517.5 pounds per square foot.

Antireflective coatings on solar cells are often made by applying a thin film of silicon nitride (sinx), which has an index of refractive of 1.2, on the top of the silicon solar cell, which has a refractive index of about 3.5. however, the sun emits radiation of various wavelengths which the solar cell absorbs, and the antireflective coating can only absolutely minimize the reflection of one of these wavelengths. the coating thickness is chosen to reduce the reflection of green/yellow light (e = 2.2 ev), which is the most intense color in the solar spectrum (shown below). which of the following coatings would minimize reflection of green/yellow light? the answer is 820 nm how? what is the angular width of the central maximum of an electron traveling at 2 x 108 m/s going through a single slit of width 1 mm.