subject
Physics, 22.09.2019 16:20 attic

In which device is light produced by electrical discharges through an ionized gas?
a ray of light travels from substance x to substance y. if the refracted light follows the path labeled b in the diagram, then what can be concluded about the two substances?


In which device is light produced by electrical discharges through an ionized gas?

ansver
Answers: 1

Another question on Physics

question
Physics, 21.06.2019 22:50
Two horizontal plates with infinite length and width are separated by a distance h in the z direction. the bottom plate is moving at a velocity u. the incompressible fluid trapped between the plates is moving in the positive x-direction with the bottom plate. align gravity with positive z. assume that the flow is fully-developed and laminar. if the systems operates at steady state and the pressure gradient in x-direction can be ignored, do the following: 1. sketch your system 2. identify the coordinate system to be used. 3. show your coordinates and origin point on the sketch. list all your assumptions. 5. apply the continuity equation to your system. nts of navier stokes equations of choice to your system 7. solve the resulting differential equation to obtain the velocity profile within the system make sure to list your boundary conditions. check units of velocity 8. describe the velocity profile you obtain using engineering terminology. sketch that on the same sketch you provided in (1). 9. obtain the equation that describes the volumetric flow rate in the system. check the units.
Answers: 2
question
Physics, 22.06.2019 05:10
Total solidification times of three casting geometries are to be compared: a sphere, a cylinder, in which the length-to-diameter ration - 1.0, and a cube. volume = 1000 cm^3 for all three shhapes, and the same casting alloy is used. a) determine the solidification times of each geometry b) based on the results of part (a), which geometric element would make the best riser? c) if the mold constant = 3.5 min/cm^2 in chvorinov's rule, compute the total solidification time for each casting.
Answers: 3
question
Physics, 22.06.2019 12:20
Electric field of the earth. the earth has a net electric charge that causes a field at points near its surface equal to 150 n> c and directed in toward the center of the earth. (a) what magnitude and sign of charge would a 60-kg human have to acquire to overcome his or her weight by the force exerted by the earth’s electric field? (b) what would be the force of repulsion between two people each with the charge calculated in part (a) and separated by a distance of 100 m? is use of the earth’s electric field a feasible means of flight? why or why not?
Answers: 2
question
Physics, 23.06.2019 02:40
An air standard cycle with variable specific heats is executed in a closed system and is composed of the following four processes. 1-2 isentropic compression 100 kpa and 22°c to 600 kpa 2-3 v=constant heat addition to 1500 k 3-4 isentropic expansion to 100 kpa 4-1 p=constant heat rejection to initial state (a) show the cycle on p-v and t-s s (b) calculate the net work output per unit mass (409 kj/kg) (c) determine the thermal efficiency (47.9%)
Answers: 1
You know the right answer?
In which device is light produced by electrical discharges through an ionized gas?
a ray of li...
Questions
question
History, 10.02.2021 18:10
question
Mathematics, 10.02.2021 18:10
question
Mathematics, 10.02.2021 18:10
question
Mathematics, 10.02.2021 18:10
Questions on the website: 13722361