Physics, 04.02.2020 19:45 shelbyo1123

This grandfather clock, made entirely of legos, has a 0.625 m long simple pendulum. what is the period of the pendulum? (include units with answer) how many times does the pendulunm swing back and forth in one day? it is desired to increase the period of the pendulum by 16%. determine the new required length of the pendulum (include units with answer)

Answers: 1

Show answers

Another question on Physics

Physics, 21.06.2019 14:50

Acylindrical specimen of a nickel alloy having an elastic modulus of 207 gpa (30 × 106psi) and an original diameter of 10.2 mm (0.40 in.) experiences only elastic deformation when a tensile load of 8900 n (2000 lbf) is applied. compute the maximum length of the specimen before deformation if the maximum allowable elongation is 0.25 mm (0.010 in.)

Answers: 3

Answer

Physics, 21.06.2019 22:30

Fft review: linspace, fs, fftshift, nfft 1. generate one second of a cosine of w,-10hz sampled at f, = 100hz and assign it to x. define a tt as your time axis 2. take 64 points fft. 3. as you remember, the dft (which the fft implements) computes n samples of s2t where k-0,1,2, n -1. plot the magnitude of this 64-points fft at range 0 to 63, what do you think of this graph? 4â·to get the x-axis into a hz-frequency form, plot this 64-points fft between-50 to 50 (the 100hz sampling rate) and have n-points between them. 5. according to your figure, what frequency is this cosine wave at? 6. remember that the fft is evaluating from 0 to 2ď€. we are used to viewing graphs from-ď€ to ď€. therefore, you need to shift your graph. 7. now according to your shifted graph. what frequency is this at? 8. note that the spikes have long drop-offs? try a 1024-point dft. note that the peak is closer to 10 and the drop-off is quicker. although, now sidelobes are an issue

Answers: 2

Answer

Physics, 22.06.2019 00:30

Orange juice has a lower or higher viscosity than chocolate syrup

Answers: 2

Answer

Physics, 22.06.2019 00:50

Acave rescue team lifts an injured spelunker directly upward and out of a sinkhole by means of a motor-driven cable. the lift is performed in three stages, each requiring a vertical distance of 10.0 m: (a) the initially stationary spelunker is accelerated to a speed of 4.90 m/s; (b) he is then lifted at the constant speed of 4.90 m/s; (c) finally he is decelerated to zero speed. how much work is done on the 68.0 kg rescue by the force lifting him during each stage?

Answers: 1

Answer

You know the right answer?

This grandfather clock, made entirely of legos, has a 0.625 m long simple pendulum. what is the peri...

Questions