At t=0 a grinding wheel has an angular velocity of 20.0 rad/s . it has a constant angular acceleration of 35.0 rad/s2 until a circuit breaker trips at time t = 2.30 s . from then on, it turns through an angle 433 rad as it coasts to a stop at constant angular acceleration. part a through what total angle did the wheel turn between t=0 and the time it stopped?

You and a friend (alex) are at a a tree-top adventure park .. . part of the course requires you to climb up a rope. you both climb the same rope in the same amount of time. however, the tension in the rope is greater when alex climbs. who did the most work? alex did - more tension means more force - more force means more work was done you did - less tension means less force - less force means more work was done to find the work done, the force exerted and distance moved are multiplied. a couch is moved twice before you are happy with its placement. the same force was used to move the couch both times. if more work is done the first time it is moved, what do you know about the distance it was moved? when more work was done, the couch was moved less. when more work was done, the couch was moved further. when more work was done, the couch wasn't moved at all. when more work was done, the couch was moved the same distance.

Aleaky 10-kg bucket is lifted from the ground to a height of 15 m at a constant speed with a rope that weighs 0.7 kg/m. initially the bucket contains 45 kg of water, but the water leaks at a constant rate and finishes draining just as the bucket reaches the 15-m level. find the work done. (use 9.8 m/s2 for g.) show how to approximate the required work by a riemann sum. (let x be the height in meters above the ground. enter xi* as xi.) lim n → ∞ n (9.8)(45−3 xi) i = 1 δx express the work as an integral. 0 dx evaluate the integral. (round your answer to the nearest integer.) j

Find the steady-state temperature at the center of the plate = /2, = /2) for sums of w from n=1 to n=19 (only odd values). find the value of n for which the change in /2, /2) is less than 1% from the value at the previous n. at this point, we consider the solution converged. does the value of the temperature at the center seem reasonable? in this part, the values of x and y are constant scalar values. you should produce a plot of the value of n on the horizontal and the estimate of the temperature at the center of the plate on the vertical. b. using the value of n (or larger) that resulted in convergence in part (a), create a contourf plot of the temperature distribution across the entire plate. use enough spatial subdivisions to create a useful plot. comment on the results. hint: you need to determine what “x” and “y” values to use to make your t matrix. i recommend using a different number of x and y values. use enough x and y values so that the plot is “smooth”.