Most of the sulfur used in the united states is chemically synthesized from hydrogen sulfide gas recovered from natural gas wells. in the first step of this synthesis, called the claus process, hydrogen sulfide gas is reacted with dioxygen gas to produce gaseous sulfur dioxide and water. suppose a chemical engineer studying a new catalyst for the claus reaction finds that 736. liters per second of dioxygen are consumed when the reaction is run at 207.°c and 0.33atm . calculate the rate at which sulfur dioxide is being produced. give your answer in kilograms per second. round your answer to 2 significant digits.

Find the steady-state temperature at the center of the plate = /2, = /2) for sums of w from n=1 to n=19 (only odd values). find the value of n for which the change in /2, /2) is less than 1% from the value at the previous n. at this point, we consider the solution converged. does the value of the temperature at the center seem reasonable? in this part, the values of x and y are constant scalar values. you should produce a plot of the value of n on the horizontal and the estimate of the temperature at the center of the plate on the vertical. b. using the value of n (or larger) that resulted in convergence in part (a), create a contourf plot of the temperature distribution across the entire plate. use enough spatial subdivisions to create a useful plot. comment on the results. hint: you need to determine what “x” and “y” values to use to make your t matrix. i recommend using a different number of x and y values. use enough x and y values so that the plot is “smooth”.