Physics, 28.06.2019 05:30 rae766

The electric field strength between two parallel conducting plates separated by 4.00 cm is 7.50×104 v/m . (a) what is the potential difference between the plates? (b) the plate with the lowest potential is taken to be at zero volts. what is the potential 1.00 cm from that plate (and 3.00 cm from the other)?

Answers: 3

Show answers

Answers

Answer from: kelcey1972harris

Potential difference is the difference in electrical potential. when the lowest potential is taken to be at zero volts then the potential 1.00 cm from that plate is 750 V.

What is the potential difference?

A potential difference is defined as the difference in the electrical potential between two points.

Given to us

Distance between the plate, d = 4 cm = 0.04 m

Electric field, E = 7.50×104 V/m .

A.) We know that for two parallel conducting plates, the potential difference between the plate is given as,

$\triangle V = Ed$

E = Magnitude of the electric field

d = distance between the plates

Substitute the values,

$E = 7.5 \times 10^4 \times 0.04\\\\E = 3000\rm\ V$

B.) We already know the potential difference between the two plates, therefore,

The potential difference between the two plates,

$\triangle V= V_A - V_B$

Since, one of the plates is having zero potential, therefore,

$\triangle V= V_A = 3000\rm\ V$

We know that the potential difference between the two plates is 300 which are 4 cm apart, therefore,

$\dfrac{\triangle V}{d} = \dfrac{V}{1}\\\\V = 750 \rm\ V$

Hence, when the lowest potential is taken to be at zero volts then the potential 1.00 cm from that plate is 750 V.

Learn more about Potential DIfference:

link

Answer from: StacySams7361

(a) 3000 V

For two parallel conducting plates, the potential difference between the plates is given by:

$\Delta V=Ed$

where

E is the magnitude of the electric field

d is the separation between the plates

Here we have:

$E=7.50\cdot 10^4 V/m$ is the electric field

d = 4.00 cm = 0.04 m is the distance between the plates

Substituting,

$\Delta V=(7.50\cdot 10^4 V/m)(0.04 m)=3000 V$

(b) 750 V

The potential difference between the two plates A and B is

$\Delta V = V_B - V_A = 3000 V$

Let's take plate A as the plate at 0 volts:

V_A = 0 V

The potential increases linearly going from plate A (0 V) to plate B (3000 V).

So, if the potential difference between A and B, separated by 4 cm, is 3000 V, then the potential difference between A and a point located at 1 cm from A is given by the proportion:

3000 V : 4 cm = V(1 cm) : 1 cm

and solving for V(1 cm) we find:

$V(1 cm)=\frac{(3000 V)(1 cm)}{4 cm}=750 V$

Answer from: Quest

no. dot product =0 when vecs at right angles

Answer from: Quest

massxgravity x heght=weightxheight= pe

4900=490xh

h=10

Another question on Physics

Physics, 22.06.2019 10:00

If a stone with an original velocity of 0 is falling from a ledgeand takes 8 seconds to hoybthe ground whays the final velocity of the stone

Answers: 2

Answer

Physics, 22.06.2019 12:30

If you place a magnet under a clear dish, and sprinkle iron fillings over it, above what part of the magnet will most of the fillings gather

Answers: 2

Answer

Physics, 22.06.2019 12:50

Air is contained in a variable-load piston-cylinder device equipped with a paddle wheel. initially, air is at 400 kpa and 17°c. the paddle wheel is now turned by an external electric motor until 75 kj/kg of work has been transferred to air. during this process, heat is transferred to maintain a constant air temperature while allowing the gas volume to triple. calculate the required amount of heat transfer in kj/kg.

Answers: 2

Answer

Physics, 22.06.2019 17:00

Sawyer is studying diffraction. he draws a diagram of a plane wave to show how light waves travel. which best describes sawyer’s error? the wave fronts should be perpendicular to the direction in which the waves move. the arrow showing the direction of movement of the waves should be pointing to the left. the arrow showing the direction of movement of the waves should be pointing downward. the wave fronts should be both parallel and perpendicular to the direction in which the waves move.

Answers: 3

Answer

You know the right answer?

The electric field strength between two parallel conducting plates separated by 4.00 cm is 7.50×104...

Questions