Car batteries are often rated in amp-hours. this rating indicates the quantity of charge that can pass through the battery before the battery's chemical energy must be restored by the car's generator or some other source. the amp-hour unit is convenient for simple calculations. for example, a 60-amp-hour battery can supply a current of 1.0 a for 60 h (or 60 a for 1.0 h) before going dead. find the energy stored in the following. (a) a 58 a-h, 10 v car battery(b) a 1.3 a-h, 1.7 v flashlight battery

Calculate the mass of an object that has a momentum of 100kg x m/sec and velocity of 4 m/sec

Some material consisting of a collection of microscopic objects is kept at a high temperature. a photon detector capable of detecting photon energies from infrared through ultraviolet observes photons emitted with energies of 0.3 ev, 0.5 ev, 0.8 ev, 2.0ev, 2.5ev, and 2.8ev. these are the only photon energies observed. (a) draw and label a possible energy-level diagram for one of the microscopic objects, which has four bound states. on the diagram, indicate the transitions corresponding to the emitted photons. explain briefly. (b) would a spring–mass model be a good model for these microscopic objects? why or why not? (c) the material is now cooled down to a very low temperature, and the photon detector stops detecting photon emissions. next, a beam of light with a continuous range of energies from infrared through ultraviolet shines on the material, and the photon detector observes the beam of light after it passes through the material. what photon energies in this beam of light are observed to be significantly reduced in intensity (“dark absorption lines”)? explain briefly.

Two point charges are separated by a certain distance. how does the strength of the electric field produced by the first charge, at the position of the second charge, change if the second charge is doubled? a. the field does not change b. the field strength decreases by half. c. the field strength doubles d. the field strength quadruples