subject
Physics, 22.06.2019 02:50 lilybear1700

Steam is generated in a boiler of a cogeneration plant at 10 mpa and 450°c at a steady rate of 5 kg/s. in normal operation, steam expands in a turbine to a pressure of 0.5 mpa and is then routed to the process heater, where it supplies the process heat. steam leaves the process heater as a saturated liquid and is pumped to the boiler pressure. in this mode, no steam passes through a condenser, which operates at 20 kpa. (a) determine the power produced in the turbine and the rate at which process heat is supplied in this mode. (b) determine the power produced in the turbine and the rate of process heat supplied if only 60 percent of the steam is routed to the process heater and the remainder is expanded to the condenser pressure. (3.32 mw; 9.69 mw; 4.25 mw; 5.82 mw)

ansver
Answers: 3

Another question on Physics

question
Physics, 22.06.2019 07:30
Select all of the following that are equal to an impulse of 20 unitsa) force= 5, time= 5.5b) force= 25, time= 0.8c) force= 0.1, time= 200d) force= 10, time= 2(its b, c, and d)(also in order to find answer they have to add to get the unit)ex= 25x.8=20 or .1x200=20
Answers: 1
question
Physics, 22.06.2019 11:50
The mass of the sun is 1.99×1030kg and its distance to the earth is 1.50×1011m. what is the gravitational force of the sun on the earth?
Answers: 3
question
Physics, 22.06.2019 18:40
Which body is in equilibrium? (1) a satellite orbiting earth in a circular orbit (2) a ball falling freely toward the surface of earth (3) a car moving with a constant speed along a straight, level road (4) a projectile at the highest point in its trajectory
Answers: 2
question
Physics, 23.06.2019 07:00
Your physics assignment is to figure out a way to use electricity to launch a small 6.0-cm-long plastic drink stirrer. you decide that you'll charge the little plastic rod by rubbing it with fur, then hold it near a long, charged wire, as shown in figure p23.56 . when you let go, the electric force of the wire on the plastic rod will shoot it away. suppose you can uniformly charge the plastic stirrer to 10 nc and that the linear charge density of the long wire is 1.0 x10-7 c/m. what is the net electric force on the plastic stirrer if the end closest to the wire is 2.0 cm away?
Answers: 1
You know the right answer?
Steam is generated in a boiler of a cogeneration plant at 10 mpa and 450°c at a steady rate of 5 kg/...
Questions
question
Mathematics, 04.09.2021 01:00
question
Business, 04.09.2021 01:00
question
Mathematics, 04.09.2021 01:00
question
Mathematics, 04.09.2021 01:00
question
Mathematics, 04.09.2021 01:00
question
Social Studies, 04.09.2021 01:00
question
Mathematics, 04.09.2021 01:00
Questions on the website: 13722362