Physics, 21.06.2019 14:10 F00Dislife

Amachinist needs to remove a tight fitting pin of material a from a hole in a block made of material b. the machinist heats both the pin and the block to the same high temperature and removes the pin easily. what statement relates the coefficient of thermal expansion of material a to that of material b? a) the situation is not possible, heating block b will shrink the hole in the material as the material expands with increasing temperatureb) material b has the same coefficient of expansion as does material ac) material b has a negative coefficient of expansion and a has a positive coefficient of expansiond) material a has a greater coefficient of expansion than does material be) material b has a greate

Answers: 1

Show answers

Another question on Physics

Physics, 21.06.2019 21:30

Aparticle with mass 1.81×10−3 kg and a charge of 1.22×10−8 c has, at a given instant, a velocity v⃗ =(3.00×104m/s)j^. what are the magnitude and direction of the particle’s acceleration produced by a uniform magnetic field b⃗ =(1.63t)i^+(0.980t)j^?

Answers: 2

Answer

Physics, 21.06.2019 23:00

The key to stability is feedback between the reservoir and the fluxes into and/or out of the reservoir. assume that the rate of outflow from a reservoir depends on the size of the reservoir according to the following relationship: outflow rate= k x (size of reservoir), where k is a constant. a reservoir of water has a volume of 5000 liters, and the rate of outflow at steady state is 25 liters per minute. what is k? (give both the numerical value and its units.) what is the residence time? what is the relationship between k and the residence time?

Answers: 1

Answer

Physics, 22.06.2019 08:30

An object weigh 40n in air ,weigh 20n when submerged in water,and 30n when submerged in a liquid of unknown liquid density.what is the density of unknown of liquid?

Answers: 1

Answer

Physics, 22.06.2019 12:30

Consider a 1000 w iron whose base plate is made of 0.5 cm thick aluminum alloy 2024-t6 (ρ = 2770 kg/m3 and cp = 875 j/kg°c). the base plate has a surface area of 0.03 m2. initially, the iron is in thermal equilibrium with the ambient air at 22°c. assuming 90% of the heat generated in the resistance wires is transferred to the plate, determine the minimum time needed for the plate temperature to reach 200°c.

Answers: 1

Answer

You know the right answer?

Amachinist needs to remove a tight fitting pin of material a from a hole in a block made of material...

Questions