Physics, 26.06.2019 18:20 alliaespino

An overhang hollow shaft carries a 900 mm diameter pulley, whose centre is 250 mm from the centre of the nearest bearing. the weight of the pulley is 600 n and the angle of lap is 180°. the pulley is driven by a motor vertically below it. if permissible tension in the belt is 2650 n and if coefficient of friction between the belt and pulley surface is 0.3, estimate, diameters of shaft, when the internal diameter is 0.6 of the external. neglect centrifugal tension and assume permissible tensile and shear stresses in the shaft as 84 mpa and 68 mpa respectively.

Answers: 1

Show answers

Another question on Physics

Physics, 22.06.2019 04:00

Amodel rocket with a mass of 0.212 kg is launched into the air with an initial speed of 84 m/s. how much kinetic energy will the rocket have at a height of 214 m? assume there is no wind resistance. 634 j 303 j

Answers: 2

Answer

Physics, 22.06.2019 06:20

Atwo-stage air compressor operates at steady state, compression 10m^3/min of air from 100 kpa and 300k to 1200 kpa. an intercooler between the two stages cools the air to 300k at a constant pressure of 350 kpa. the compression processes are isentropic. a) calculate the power required to run the compressor, in kw b) compare the result to the power required for isentropic compression from the same inlet state to the same final pressure.

Answers: 1

Answer

Physics, 22.06.2019 07:40

Which lists the fundamental forces in order, from strongest to weakest? strong nuclear, weak nuclear, electromagnetic, gravitational strong nuclear, electromagnetic, weak nuclear, gravitational gravitational, weak nuclear, electromagnetic, strong nuclear electromagnetic, gravitational, strong nuclear, weak nuclear

Answers: 2

Answer

Physics, 22.06.2019 13:10

Which of the following are used in an electrochemical cell? a. electrodes b. electrolyte c. terminals d. all of the above

Answers: 3

Answer

You know the right answer?

An overhang hollow shaft carries a 900 mm diameter pulley, whose centre is 250 mm from the centre of...

Questions