subject
Physics, 02.07.2019 21:20 maddy121209

If a anti level beam of length l, which bends due to a uniform load of u ib/ft, is also sabjeet to an axial orce p at its free end (see figure 2). the equation of its elastic curve is for this equation, the origin o has been taken at the free end. i is the moment of inertia; bere iontr-0 and at o,- 64 figure 2: diagram or a cantilever beam (a) solve the boundary value problem by any mamerical method for a wooden beam 2in × 4 in x 10f, where e-12 x 10s lb/in2. find y versus 1 when the beam has the 4 in dimension vertical with u-23 b/ft and a tension force o p-300 lb. (b) and also solve for the deflections if the beam is turned so that the 4 in dimeusion is horizontal (c) if the factor of the radius of curvature has been taken into account, equation (5) becommes if the defection of the beam is small, the difference is negligible, but in some cases this is not true. furthermore, if there is considerable bending of the beam, the horizontal distance from the origin to the wall is less than l, the original length of the beam. solve the equation (6) with the same conditions, and determine by how mach the deflections differ from those previoas calculations

ansver
Answers: 2

Another question on Physics

question
Physics, 22.06.2019 10:30
Air is to be preheated by hot exhaust gases in a cross-flow heat exchanger before it enters the furnace. air enters the heat exchanger at 95 kpa and 20°c at a rate of 0.6 m^3/s. the combustion gases (cp = 1.10 kj/kg°c) enter at 160°c at a rate of 0.95 kg/s and leave at 95°c. determine the rate of heat transfer to the air and its outlet temperature.
Answers: 2
question
Physics, 22.06.2019 19:30
Juliette sets the initial velocity to +10 m/s, the acceleration to zero, and clicks “start.” how can shakina describe the subsequent motion of the car juliette controls?
Answers: 3
question
Physics, 22.06.2019 19:30
If the area of a square has increased by a factor of 16, by how much has each side increased?
Answers: 3
question
Physics, 22.06.2019 22:20
The starship enterprise is caught in a time warp and spock is forced to use the primitive techniques of the 20th century to determine the specific heat capacity of an unknown mineral. the 125-g sample was heated to 96.3°c and placed into a calorimeter containing 85.9 g of water at 20.0°c. the heat capacity of the calorimeter was 14.2 j/k. the final temperature in the calorimeter was 24.5°c. what is the specific heat capacity (in j/g°c) of the mineral? enter to 4 decimal places.
Answers: 1
You know the right answer?
If a anti level beam of length l, which bends due to a uniform load of u ib/ft, is also sabjeet to a...
Questions
question
Advanced Placement (AP), 16.02.2021 21:30
question
History, 16.02.2021 21:30
question
Mathematics, 16.02.2021 21:30
question
Geography, 16.02.2021 21:30
Questions on the website: 13722360