Consider that you are using an extrusion based abs printer. calculate the required heater power, total pressure drop in liquefier, and motor power for extrusion at steady state condition for deposition speed of 0.5, 1, 1.5, 3, 5, 10, and 50 mm/s and plot them on three separate graphs. use the following data m 2.16 φ = 7.4 x 10-5 (kpa)-m s-1 p 900 kg/m3 p 1500 j/kg-k di 1.8 mm し,-10 mm some required data is missing that can be found from literature.

Anne applies a force on a toy car and makes it move forward. what can be said about the forces acting on the toy car at the moment anne applies the force?

The diagram shows a series of volcanic island and a hot spot determine the direction of movement of the tectonic plate that for the island

Beryl states that insulation with the smallest possible thermal conductivity is best to keep a house warm in winter, but worst for keeping a house cool in summer. sapphire insists the reverse is true: low thermal conductivity is good in the summer, but bad in the winter. which one, if either is correct? a. beryl, because low thermal conductivity results in low heat transfer. b. beryl, because low thermal conductivity results in high heat transfer. d. sapphire, because low thermal conductivity results in high heat transfer. e. neither, because low heat transfer is desirable both in summer and in winter.