An engineer has designed a valve that will regulate water pressure on an automobile engine. the valve was tested on 180 engines and the mean pressure was 4.8 pounds/square inch (psi). assume the population standard deviation is 1.0. the engineer designed the valve such that it would produce a mean pressure of 4.6 psi. it is believed that the valve does not perform to the specifications. a level of significance of 0.05 will be used. find the value of the test statistic. round your answer to two decimal places.

The frequency of vibrations of a vibrating violin string is given by f = 1 2l t ρ where l is the length of the string, t is its tension, and ρ is its linear density.† (a) find the rate of change of the frequency with respect to the following. (i) the length (when t and ρ are constant) (ii) the tension (when l and ρ are constant) (iii) the linear density (when l and t are constant) (b) the pitch of a note (how high or low the note sounds) is determined by the frequency f. (the higher the frequency, the higher the pitch.) use the signs of the derivatives in part (a) to determine what happens to the pitch of a note for the following. (i) when the effective length of a string is decreased by placing a finger on the string so a shorter portion of the string vibrates df dl 0 and l is ⇒ f is ⇒ (ii) when the tension is increased by turning a tuning peg df dt 0 and t is ⇒ f is ⇒ (iii) when the linear density is increased by switching to another string df dρ 0 and ρ is ⇒ f is ⇒