Physics, 13.07.2019 02:40 QueenNerdy889
Design an operational amplifier capable of providing a voltage gain of at least 500 v/v to a load as small as r 1k. the circuit will include a differential amplifier, and additional amplifier stages. the input voltage is considered to be differential, while the output voltage should be measured with respect to the ground. the dc voltage at the output should be offset to 0v. you are only allowed to use resistors, bjts, and mosfets in your design. do not use capacitors or operational amplifiers since 500 v/v is not a small gain, the amplifier may not work properly for a large peak-to-peak input. determine what the maximum peak-to-peak input should be, based on your design.
Answers: 3
Physics, 22.06.2019 10:50
Asheet of steel 1.5 mm thick has nitrogen atmospheres on both sides at 1200oc and is permitted to achieve a steady-state diffusion condition. the diffusion coefficient for nitrogen in steel at this temperature is 6 x 10- 11 m2 /s, and the diffusion flux is found to be 1.2 x 10-7 kg/m2 -s. also, it is known that the concentration of nitrogen in the steel at the high-pressure surface is 4 kg/m3 . how far into the sheet from this high-pressure side will the concentration be 2.0 kg/m3 ? assume a linear concentration profile.
Answers: 3
Physics, 22.06.2019 15:30
Aforce of 100 newtons is used to move an object a distance of 15 meters with a power of 50 watts. find the work dine and the time it takes to do the work
Answers: 1
Physics, 22.06.2019 17:00
Two conductors, a and b, are each in the shape of a tetrahedron. but of different sizes. they are charged in the following manner: 1. tetrahedron a is charged from an electrostatic generator to charge q. 2. tetrahedron a is briefly touched to tetrahedron b. 3. steps 1 and 2 are repeated until the charge on tetrahedron b reaches a maximum value. if the charge on tetrahedron b was q/4 after the first time it touched tetrahedron a. what is the final charge qbmax on tetrahedron b?
Answers: 2
Physics, 22.06.2019 18:00
Wind and moving water provide energy. question 1 options: chemical mechanical thermal none of the above
Answers: 1
Design an operational amplifier capable of providing a voltage gain of at least 500 v/v to a load as...
Business, 10.03.2020 01:03
Mathematics, 10.03.2020 01:03
Computers and Technology, 10.03.2020 01:04
Computers and Technology, 10.03.2020 01:04