subject
Physics, 23.07.2019 04:20 meredith48034

Given that the initial rate constant is 0.0191 s-1 at an initial temperature of 24°c, what would the rate constant be at a temperature of 120°c for a reaction with an activation energy of 43.4 kj/mol?

ansver
Answers: 3

Another question on Physics

question
Physics, 21.06.2019 17:10
Space-time metric ds2= -dt2+at2dx2+bt2dy2+ct2dz2 (a)how does the area of a rectangle with vertices at ( x=0, y=0, z=0 ), (1,0,0 ), ( 0,1,0 ) and (1,1,0 ) changes with time? (b) if a photon moving in the x direction starts from the origin at t=1, when does it reach x=l? (ds=0 for the trajectory of a photon.) (c) the proper time for a particle is defined by cd=ds. what is the proper time for a particle to move along the trajectory ( x(t)=t, y(t)=0, z(t)=0 ) from t=0 to 1 ? what is the condition on the parameter a so that the velocity of the particle never exceeds the speed of light ?
Answers: 2
question
Physics, 22.06.2019 01:00
Avehicle has an oil leak that is causing the entire oil pan to be wet, but inspection reveals no exact source after cleaning off the oil residue. technician a says to install a fluorescent dye in the crankcase and operate the engine, then re-inspect for leaks with a special light (black light). technician b says the oil leak may be coming from a source at the top of the engine, such as a valve cover gasket. who is correct?
Answers: 1
question
Physics, 22.06.2019 02:50
20. threshold braking in the vehicle's braking system occurs when a. the brake pedal is pushed, heel on floorboard, with full foot pressure. b. the brakes are exerting full braking power, without traction loss. c. the driver begins pushing down the brake pedal, with moderate slowdown. d. the brakes just begin to take hold with a gradual slowdown.
Answers: 3
question
Physics, 22.06.2019 02:50
Steam is generated in a boiler of a cogeneration plant at 10 mpa and 450°c at a steady rate of 5 kg/s. in normal operation, steam expands in a turbine to a pressure of 0.5 mpa and is then routed to the process heater, where it supplies the process heat. steam leaves the process heater as a saturated liquid and is pumped to the boiler pressure. in this mode, no steam passes through a condenser, which operates at 20 kpa. (a) determine the power produced in the turbine and the rate at which process heat is supplied in this mode. (b) determine the power produced in the turbine and the rate of process heat supplied if only 60 percent of the steam is routed to the process heater and the remainder is expanded to the condenser pressure. (3.32 mw; 9.69 mw; 4.25 mw; 5.82 mw)
Answers: 3
You know the right answer?
Given that the initial rate constant is 0.0191 s-1 at an initial temperature of 24°c, what would the...
Questions
question
Mathematics, 23.06.2019 14:30
question
Mathematics, 23.06.2019 14:30
Questions on the website: 13722363