A10.0-g bullet is fired into, and embeds itself in, a 1.95-kg block attached to a spring with a force constant of 16.6 n/m and whose mass is negligible. how far is the spring compressed if the bullet has a speed of 300 m/s just before it strikes the block and the block slides on a frictionless surface? note: you must use conservation of momentum in this problem because of the inelastic collision between the bullet and block.

Aperson gives a shopping cart an initial push along a horizontal floor to get it moving, and then lets go. the cart travels forward along the floor, gradually slowing as it moves. consider the horizontal force(s) on the cart while it is moving forward and slowing. which of the following statements is correct? (a) both a forward and a backward force are acting on the cart, but the forward force is larger. (b) only a forward force is acting which diminishes with time. (c) both a forward and a backward force are acting on the cart, but the backward force is larger. (d) only a backward force is acting, no forward force.

Antireflective coatings on solar cells are often made by applying a thin film of silicon nitride (sinx), which has an index of refractive of 1.2, on the top of the silicon solar cell, which has a refractive index of about 3.5. however, the sun emits radiation of various wavelengths which the solar cell absorbs, and the antireflective coating can only absolutely minimize the reflection of one of these wavelengths. the coating thickness is chosen to reduce the reflection of green/yellow light (e = 2.2 ev), which is the most intense color in the solar spectrum (shown below). which of the following coatings would minimize reflection of green/yellow light? the answer is 820 nm how? what is the angular width of the central maximum of an electron traveling at 2 x 108 m/s going through a single slit of width 1 mm.

If an electric circuit is not grounded it is best to reach out and touch it to provide the ground a.true or b.false