Physics, 03.08.2019 02:30 abdullahs4639

How to tell a series circuit from a parallel circuit

Answers: 2

Show answers

Answers

Answer from: hdhdhd49jdhd

Explanation:

Elements in series form a chain. One directly connects to the next one downstream.

Elements in parallel are on separate branches. The branches split from a common point and then combine back into one.

How to tell a series circuit from a parallel circuit

Answer from: rose8969

Pretend you're an electron. You're sitting at the negative terminal of a battery, but the voltage of the battery makes you WANT to flow to the positive terminal, any way you can.

There are a bunch of things connected between the terminals, and they're all DC conductors. Like resistors, light bulbs, motors, electromagnets, coils. So you know that there's a path you can follow to get to the positive terminal.

You start out. You flow through one component or device at a time, making your way closer to the positive terminal all the time.

If you EVER come to a place where there are two or more components connected together, and they both can take you in the right direction so you have to choose which one to use, then at that point you're entering a PARALLEL part of the journey.

As long as there's never more than one component to choose after you finish the one you're in now, you're traveling through SERIES parts of the trip.

The whole trip could actually have some of both kinds of parts in it. Then, technically, it would be called a "series/parallel circuit". There would be choices to make at some junctions, but not at others.

Answer from: Quest

This is what i found “in a gas turbine engine, the combustor or combustion chamber is fed high pressure air by the compression system. early gas turbine engines used a single chamber known as a can type combustor. today three main configurations exist: can, annular and cannular (also referred to as can-annular tubo-annular).” i hope this you for what your looking for. can you plz mark me brainliest?

Answer from: Quest

he . if i may ask what i your question exactly?

explanation:

Another question on Physics

Physics, 22.06.2019 04:40

Argon is adiabatically compressed from an initial volume of 16 liters to a final volume of 2 liters. by what factor do the following quantities change? do they increase or decrease? (a) the rms speed (b) the thermal energy of the gas (c) the molar specific heat cv (d) the pressure

Answers: 3

Answer

Physics, 22.06.2019 06:00

An object moves from position +34m to the position -15m in 15 seconds. what is the total displacement? what is the total velocity?

Answers: 3

Answer

Physics, 22.06.2019 08:20

The bubba chump shrimp company processes and packages shrimp for sale to wholesale seafood distributors. the shrimp are transported to the main plant by trucks that carry 1,000 pounds (lb) of shrimp. once the continuous flow processing of the shrimp begins, no inventory is allowed in buffers due to spoilage and all of the shrimp must be processed within 12 hours to prevent spoilage. the processing begins at the sorter, where the trucks dump the shrimp onto a conveyor belt that feeds into the sorter, which can sort up to 500 lb per hour. the shrimp then proceed to the desheller, which can process shrimp at the rate of 400 lb per hour. however, after 3 hours and 45 minutes of processing, the desheller must be stopped for 15 minutes to clean out empty shrimp shells that have accumulated. the veins of the shrimp are then removed in the deveining area at a maximum rate of 360 lb per hour. the shrimp proceed to the washing area, where they are processed at 750 lb per hour. finally, the shrimp are packaged and frozen. what is the daily process capacity of the processing plant (excluding the packaging and freezing)?

Answers: 2

Answer

Physics, 22.06.2019 11:10

Which situation will produce the greatest change of momentum

Answers: 2

Answer

You know the right answer?

How to tell a series circuit from a parallel circuit...

Questions