Tina is looking out a window and throws marble straight downward toward the sidewalk below at a speed of 5.00 m/s and the window is 39.0 meters above the sidewalk. answer the two questions below, using three significant digits. part a: what is the speed of the ball (11) when it hits the ground? number m/s (remember: enter a magnitude.) part b: after 1.90 s, how far down has the marble travelled?

Apositive rod is placed to the left of sphere a, and the spheres are separated. which best describes the spheres? sphere a is negative and sphere b is positive because protons from sphere a are attracted to the rod and move to sphere b. sphere a is negative and sphere b is positive because electrons from sphere b are attracted to the rod and move to sphere a. sphere a is positive and sphere b is negative because electrons from the rod move to sphere b and protons then move to sphere a. sphere a is positive and sphere b is negative because protons move from sphere b to the rod and also to sphere a.

Steam is generated in a boiler of a cogeneration plant at 10 mpa and 450°c at a steady rate of 5 kg/s. in normal operation, steam expands in a turbine to a pressure of 0.5 mpa and is then routed to the process heater, where it supplies the process heat. steam leaves the process heater as a saturated liquid and is pumped to the boiler pressure. in this mode, no steam passes through a condenser, which operates at 20 kpa. (a) determine the power produced in the turbine and the rate at which process heat is supplied in this mode. (b) determine the power produced in the turbine and the rate of process heat supplied if only 60 percent of the steam is routed to the process heater and the remainder is expanded to the condenser pressure. (3.32 mw; 9.69 mw; 4.25 mw; 5.82 mw)

Acommercial refrigerator with refrigerant-134a as the working fluid is used to keep the refrigerated space at -35°c by rejecting waste heat to cooling water that enters the condenser at 18°c at a rate of 0.25 kg/s and leaves at 26°c. the refrigerant enters the condenser at 1.2 mpa and 50°c. if the compressor consumes 3.3 kw of power, determine (a) the mass flow rate of the refrigerant, (b) the refrigeration load, (c) the cop, and (d) the minimum power input to the compressor for the same refrigeration load.