Physics, 10.09.2019 17:30 whisperyang

Conventional hot-water heaters consist of a tank of water maintained at a fixed temperature. the hot water is to be used when needed. the drawback is that energy is wasted because the tank loses heat when it is not in use, and you can run out of hot water if you use too much. some utility companies are encouraging the use of on-demand water heaters (also known as flash heaters), which consist of heating units to heat the water as you use it. no water tank is involved, so no heat is wasted. a typical household shower flow rate is 5.96�10? 4gal/min (9.44l/min ) with the tap water being heated from 50.0^f (10.0^c) to 121^ f (49.4^ c) by the on-demand heater. what rate of heat input (either electrical or from gas) is required to operate such a unit, assuming that all the heat goes into the water?

Answers: 1

Show answers

Another question on Physics

Physics, 21.06.2019 17:10

Space-time metric ds2= -dt2+at2dx2+bt2dy2+ct2dz2 (a)how does the area of a rectangle with vertices at ( x=0, y=0, z=0 ), (1,0,0 ), ( 0,1,0 ) and (1,1,0 ) changes with time? (b) if a photon moving in the x direction starts from the origin at t=1, when does it reach x=l? (ds=0 for the trajectory of a photon.) (c) the proper time for a particle is defined by cd=ds. what is the proper time for a particle to move along the trajectory ( x(t)=t, y(t)=0, z(t)=0 ) from t=0 to 1 ? what is the condition on the parameter a so that the velocity of the particle never exceeds the speed of light ?

Answers: 2

Answer

Physics, 22.06.2019 17:30

Atruck driver is attempting to deliver some furniture. first, he travels 8 km east, and then he turns around and travels 3 km west. finally, he turns again and travels 13 km to his destination. what is the drivers distance

Answers: 3

Answer

Physics, 22.06.2019 18:30

An electron in an x-ray machine is accelerated through a potential difference of 1.00 × 104 v before it hits the target. what is the kinetic energy of the electron in electron volts?

Answers: 2

Answer

Physics, 22.06.2019 20:00

In an old-fashioned amusement park ride, passengers stand inside a 3.0-m-tall, 5.0-m-diameter hollow steel cylinder with their backs against the wall. the cylinder begins to rotate about a vertical axis. then the floor on which the passengers are standing suddenly drops away! if all goes well, the passengers will “stick” to the wall and not slide. clothing has a static coefficient of friction against steel in the range 0.60 to 1.0 and a kinetic coefficient in the range 0.40 to 0.70. part a what is the minimum rotational frequency, in rpm, for which the ride is safe? express your answer using two significant figures. f f = rpm

Answers: 1

Answer

You know the right answer?

Conventional hot-water heaters consist of a tank of water maintained at a fixed temperature. the hot...

Questions