Ablock of 250-mm length and 48 × 40-mm cross section is to support a centric compressive load p. the material to be used is a bronze for which e = 95 gpa. determine the largest load that can be applied, knowing that the normal stress must not exceed 80 mpa and that the decrease in length of the block should be at most 0.12% of its original length.

153.6 kN

Explanation:

The elastic constant k of the block is

k = E * A/l

k = 95*10^9 * 0.048*0.04/0.25 = 729.6 MN/m

0.12% of the original length is:

0.0012 * 0.25 m = 0.0003  m

Hooke's law:

F = x * k

Where x is the change in length

F = 0.0003 * 729.6*10^6 = 218.88 kN (maximum force admissible by deformation)

The compressive load will generate a stress of

σ = F / A

F = σ * A

F = 80*10^6 * 0.048 * 0.04 = 153.6 kN

The smallest admisible load is 153.6 kN

explanation:

as the height from which the ruler was dropped increased, the speed of the ruler at ryan's hand increased.

this could be newton#'s law of cooling. the cooling curve is exponential