subject
Physics, 16.09.2019 19:00 alemvp8219

The drawing shows a square, each side of which has a length of l = 0.250 m. two different positive charges q1 and q2 are fixed at the corners of the square. find the electric potential energy of a third charge q3 = -7.00 x 10-9 c placed at corner a and then at corner b.

ansver
Answers: 2

Another question on Physics

question
Physics, 21.06.2019 23:30
Classify the following soils according to the uscs classification system. provide appropriate uscs designations. a) this sample of well-graded gravel with sand was obtained from a large earthen dam in vancouver, canada. the sample has 73% fine to coarse sub-angular gravel, 25% fine to coarse sub-angular sand and 2% fines. the maximum size of the particles is 75 mm. the coefficient of curvature is 2.7, while the uniformity coefficient is 12.4. b) this dark brown and wet soil with a “strong organic odor” has 100% passing the no. 200 sieve. the liquid limit of the material is 32% when not dried and is 21% when oven-dried. the plastic index is 21% when not dried. c) this sand has 61% predominantly fine sand, 23% silty fines, and 16% fine sub-rounded gravel size. the maximum size is 20 mm. the liquid limit is 33% and the plastic limit is 27%. d) this soil has 74% fine to coarse sub-angular reddish sand and 26% organic and silty dark brown fines. the liquid limit is 37% when not dried and is 26% when oven dried. the plastic index is 6% when not dried.
Answers: 1
question
Physics, 22.06.2019 08:20
The two required components for a generator are
Answers: 3
question
Physics, 22.06.2019 13:00
Ways that industry and agriculture use physical properties to separate substances
Answers: 1
question
Physics, 22.06.2019 19:20
Two kilograms of air within a piston–cylinder assembly executes a carnot power cycle with maximum and minimum temperatures of 800 k and 300 k, respectively. the heat transfer to the air during the isothermal expansion is 60 kj. at the end of the isothermal expansion the volume is 0.4 m3. assume the ideal gas model for the air. determine the thermal efficiency, the volume at the beginning of the isothermal expansion, in m3, and the work during the adiabatic expansion, in kj.
Answers: 1
You know the right answer?
The drawing shows a square, each side of which has a length of l = 0.250 m. two different positive c...
Questions
question
Mathematics, 22.05.2021 08:20
question
English, 22.05.2021 08:20
question
Mathematics, 22.05.2021 08:20
question
Mathematics, 22.05.2021 08:20
question
Mathematics, 22.05.2021 08:20
Questions on the website: 13722360