subject
Physics, 27.09.2019 01:30 brethan

Aspring gun is made by compressing a spring in a tube and then latching the spring at the compressed position. a 4.97-g pellet is placed against the compressed and latched spring. the spring latches at a compression of 4.60 cm, and it takes a force of 9.12 n to compress the spring to that point. (note: while the spring is being compressed the ball is not in contact with the spring.) (a) if the gun is fired vertically, how fast is the pellet moving when it loses contact with the spring? (include the effect of gravity and assume that the pellet leaves the spring when the spring is back to its relaxed length.)

ansver
Answers: 3

Another question on Physics

question
Physics, 22.06.2019 03:00
An internally reversible refrigerator has a modified coefficient of performance accounting for realistic heat transfer processes of where qin is the refrigerator cooling rate, qout is the heat rejection rate, and is the power input. show that copm can be expressed in terms of the reservoir temperatures tc and th, the cold and hot thermal resistances rt,c and rt,h, and qin, as where rtot rt,c rt,h. also, show that the power input may be expressed as 1.39 a household refrigerator operates with cold- and hot-temperature reservoirs of tc 5 c and th 25 c, respectively. when new, the cold and hot side resistances are rc,n 0.05 k/w and rh,n 0.04 k/w, respectively. over time, dust accumulates on the refrigerator’s condenser coil, which is located behind the refrigerator, increasing the hot side resistance to rh,d 0.1 k/w. it is desired to have a refrigerator cooling rate of qin 750 w. using the results of problem 1.38, determine the modified coefficient of performance and the required power input w under (a) clean and (b) dusty coil conditions. internally reversible refrigerator qout qin w high-temperature reservoir low-temperature reservoir th th,i tc,i tc high-temperature side resistance low-temperature side resistance w qin th tc qinrtot tc qinrtot copm tc qinrtot th tc
Answers: 2
question
Physics, 22.06.2019 04:50
Waves that cause the most damage during an earthquake are a. surface waves c. s waves b. p waves d. ocean waves
Answers: 2
question
Physics, 22.06.2019 06:00
Explain earth's motion, using the terms "precession" and "rotation" in your answer.
Answers: 1
question
Physics, 22.06.2019 06:40
Determine the change in width a, height b, thickness t when a plate is subjected to the uniform distributed load and is made of material having modulus of elasticity e=230 gpa and poisson's ratio ν=1/3. given : a=400 mm and b= 300 mm also the uniformly distributed load in downward y direction of plate is 2 mn/m and in the positive x direction is 3 mn/m and t=20 mm
Answers: 1
You know the right answer?
Aspring gun is made by compressing a spring in a tube and then latching the spring at the compressed...
Questions
question
Biology, 16.10.2020 05:01
Questions on the website: 13722362