A0.7 ml mixture of pentanol and heptanol are separated and collected using preparative gas chromatography on a gc fitted with a polar column and a tcd detector. during the separation, why are the injection port and detector heated to a higher temperature than the column? a heated injector creates flash vaporization which allows separation at temperatures lower than the boiling point of the sample. all samples leaving the column must be vaporized before leaving the gc, so the thermal conductivity detector is run at a hot temperature. the injector must be kept at a higher temperature than the column to allow the sample the opportunity to effectively solidify in the column. the wire in the thermal conductivity detector needs to be cooled by the eluent in order to register a signal.

we need to know the time interval during which the force acts. impulse of force = momentum change

scattering of light by tiny particles in air to produce the colors we see on sky, is dependent on the following factors:

(i) wavelength of light

(ii) size of the scattering particle  

(iii) distance traveled by light through the atmosphere.

according to rayleigh's law of scattering, the amount of scattering is inversely proportional to the fourth power of its wavelength. shorter the wavelength, greater is its scattering. hence violet/blue light is scattered more than red.

sun's light is a composite light ( visible light) with wavelengths in the range 400 nm (violet) to 700 nm (red). as sunlight passes through our atmosphere, the molecules of air scatter light according to their wavelengths. during sunrise and sunset, the sun's position is below the horizon. hence light from the sun travels a greater distance in the atmosphere when compared to its position a noon.

as sunlight enters the earth's atmosphere, blue light is scattered away and at the end of its journey in the sky, only red and orange wavelengths remain in the beam.

hence at sunrise and sunset, the sky appears reddish orange.

electromagnetic shielding is the practice of reducing the electromagnetic field in a space by blocking the field with barriers made of conductive or magnetic materials. shielding is typically applied to enclosures to isolate electrical devices from their surroundings, and to cables to isolate wires from the environment through which the cable runs. electromagnetic shielding that blocks radio frequency electromagnetic radiation is also known as rf shielding.

the shielding can reduce the coupling of radio waves, electromagnetic fields and electrostatic fields. a conductive enclosure used to block electrostatic fields is also known as a faraday cage. the amount of reduction depends very much upon the material used, its thickness, the size of the shielded volume and the frequency of the fields of interest and the size, shape and orientation of apertures in a shield to an incident electromagnetic

from wikipedia