We consider the angular response to a unit step input force f(t). we observe that the unit step response θ(t) is oscillatory with the following properties: i) the angular displacement θ(t) reaches a maximum value θmax = 6 deg ii) the angular displacement θ(t) converges to a steady-state value θss = 4 deg when t → [infinity]. using this information, determine the values of the mass m and the rotational damping coefficient br.

There is no graph to look at on here, but i shall explain them to you. a line graph is just in its title it’s a graph with a line running through the dots to show an increase or decrease. a bar graph is used to show how much or how little something is so a comparison. a scatter plot is used to graph points to tell the data. and i don’t know what a histogram is.

The answer is as follows in the photo

Ohm's law tells you that i = v/r where v is equivalent voltage and r is equivalent resistance of the circuit
since all circuits have the same voltage, your question is really asking which circuit has the lowest total resistance, since the lower the resistance, the higher the current
circuit a has a resistance of 5 ohms; circuit c is in series so has a resistance of 10 ohms; circuit b is in parallel and therefore has a resistance of 2.5 ohms (review your notes on adding resistances in parallel and series); therefore b has the highest current

Iassume the answer is 75 feet. inwards to outwards rather than outwards to inwards. probably be 75.hachures are stokes drawn in direction of the steepest slope. a series of short parallel lines drawn on a map to indicate topographic relief. it is actually called hachures on contour lines. the small marks in the center of the feature are called hachures.observe the picture attached