Consider a relatively nearby, single star, that is, a star that is not a member of a binary system and has no known orbiting planets. listed below are a few properties of this star. classify each property as either something that we can observe or measure directly (with the aid of a telescope and instruments such as cameras or spectrographs) or something that we must infer indirectly (and hence is correct only if all of our assumptions are correct).observer directlya. colorb. parallax anglec. spectral typed. apparent brightnesse. luminosityf. surface temperatureg. massh. radius

Ohm's law tells you that i = v/r where v is equivalent voltage and r is equivalent resistance of the circuit
since all circuits have the same voltage, your question is really asking which circuit has the lowest total resistance, since the lower the resistance, the higher the current
circuit a has a resistance of 5 ohms; circuit c is in series so has a resistance of 10 ohms; circuit b is in parallel and therefore has a resistance of 2.5 ohms (review your notes on adding resistances in parallel and series); therefore b has the highest current

It really doesn't matter for any of the questions that you've listed.

You need to be more specific.  i really don't know what a "motion map" is.you can draw a graph of an object's position, distance, displacement, speed,velocity, or acceleration versus time, or you can draw a graph of the object's x-position versus its y-position and not give any information about time at all.if the graph presents position or displacement against time,  then constant velocity is a straight line . . i.e. a line that has  constant slope.if the graph shows speed against time, then constant velocityis a horizontal piece of line.if the graph shows acceleration against time, then constant  velocity is a piece of line that lies on the x-axis . . it's value is zero. 

Answermake them get very hot and over time wear them out;