7one lb of refrigerant 134a contained within a piston–cylinder assembly undergoes a process from a state where the temperature is 60f and the refrigerant is saturated liquid to a state where the pressure is 140 lbf/in 2 and quality is 50%. determine the change in specific entropy of the refrigerant, in btu/lbr. can this process be accomplished adiabatically?

On a cold day, when the air temperature is 0°c, you empty your lungs and take a deep breath, filling your lungs with 4.2 l of air. if you hold your breath until the temperature of the air in your lungs reaches 37°c, what is the volume of the air in your lungs at that point, assuming the pressure does not change?

Steam is generated in a boiler of a cogeneration plant at 10 mpa and 450°c at a steady rate of 5 kg/s. in normal operation, steam expands in a turbine to a pressure of 0.5 mpa and is then routed to the process heater, where it supplies the process heat. steam leaves the process heater as a saturated liquid and is pumped to the boiler pressure. in this mode, no steam passes through a condenser, which operates at 20 kpa. (a) determine the power produced in the turbine and the rate at which process heat is supplied in this mode. (b) determine the power produced in the turbine and the rate of process heat supplied if only 60 percent of the steam is routed to the process heater and the remainder is expanded to the condenser pressure. (3.32 mw; 9.69 mw; 4.25 mw; 5.82 mw)

This is really important 1.which of the following prefixes represents the largest value? (2 points)gigahectorkilomilli2.which of the following types of graphs is best for plotting the mean, median, and mode of data? (2 points)bar graphbox-and-whiskercircle graphstem-and-leaf