Physics, 12.11.2019 05:31 tkailyn

Abucket hangs from a rope that is attached to a cylindrical, massive pulley with a radius of 0.540 m and a mass of 2.22 kg. the pulley spins as the bucket falls, undergoing an angular the bucket starts at rest and falls a distance 5.51 m before hitting the water. during this time the pulley undergoes an angular acceleration of 3.19 rad/s2, which means the bucket is falling with a linear acceleration of 1.72 m/s2 (a=

1. what is the moment of inertia of the pulley? (remember, this is a solid cylinder.)

2. what is the magnitude of the torque that the rope exerts on the pulley? (think about the rotational version of newton's second law.)

3. since you know the torque, what is the force that the rope is exerting on the pulley?

4. how much time elapses between when the bucket is released and when it hits the water?

Answers: 2

Show answers

Another question on Physics

Physics, 21.06.2019 19:30

The us government wants to allocate billions of dollars in the next 10 years to assure our future energy security. the funds will be spread among a variety of possible energy resources. where do you think the government should put the greatest support: solar energy, wind energy, clean coal, oil exploration, gas exploration, or a combination of sources? are there other efforts that should be explored? support your position with cited information for both questions.

Answers: 2

Answer

Physics, 22.06.2019 01:10

Asteam power plant operates on an ideal reheat rankine cycle between the pressure limits of 15 mpa and 10 kpa. the mass flow rate of steam through the cycle is 12 kg/s. steam enters both stages of the turbine at 500°c. if the moisture content of the steam at the exit of the low-pressure turbine is not to exceed 10 percent, determine (a) the pressure at which reheating takes place, (b) the total rate of heat input in the boiler, and (c) the thermal efficiency of the cycle. also, show the cycle on a t-s diagram with respect to the saturation lines. (2.15 mpa; 45.0 mw; 42.6%)

Answers: 3

Answer

Physics, 22.06.2019 09:00

The material that keeps its new shape after it is stretched is called?

Answers: 1

Answer

Physics, 22.06.2019 13:40

An ideal otto cycle has a compression ratio of 10.5, takes in air at 90 kpa and 40°c, and is repeated 2500 times per minute. using constant specific heats at room temperature, determine the thermal efficiency of this cycle and the rate of heat input if the cycle is to produce 90 kw of power.

Answers: 2

Answer

You know the right answer?

Abucket hangs from a rope that is attached to a cylindrical, massive pulley with a radius of 0.540 m...

Questions