Physics, 13.11.2019 17:31 Amyra2003

1. draw a bar magnet as a magnetic dipole consisting of two magnetic monopoles of. label each monopole with its strength and sign. label the distance. choose a convenient coordinate system.
2. select a point on your drawing along one of the symmetry axes at which you will calculate the magnetic field. the point should be outside the magnet.
3. assume that the magnetic field caused by a magnetic monopole has the same behavior as a function of distance as the electric field caused by a charge. write down this function
4. add the magnetic field from each pole at that point you selected to get the
5. graph your resulting equation for magnetic field strength along that axis as
6. repeat the above steps for the other axis magnetic field at that point. a function of position along the axis.

Answers: 3

Show answers

Another question on Physics

Physics, 22.06.2019 11:30

1. a camcorder has a power rating of 19 watts. if the output voltage from its battery is 7 volts, what current does it use?answer units 2. a 1.5m wire carries a 6 a current when a potential difference of 57 v is applied. what is the resistance of the wire? yourunits 3. a clothes dryer uses about 2 amps of current from a 240 volt line. how much power does it use? yourunits 4.

Answers: 1

Answer

Physics, 22.06.2019 18:00

The protons in a nucleus are approximately 2 ✕ 10^−15 m apart. consider the case where the protons are a distance d = 1.93 ✕ 10^−15 m apart. calculate the magnitude of the electric force (in n) between two protons at this distance.

Answers: 1

Answer

Physics, 22.06.2019 21:30

What describes the formation of horizon b? a. forms at the surface b. features parent material c. undergoes the most change d. forms due to decomposed material i think the answer is c. undergoes the most change

Answers: 1

Answer

Physics, 23.06.2019 01:30

The flame produced by the burner of a gas (propane) grill is a pale blue color when enough air mixes with the propane (c3h8) to burn it completely. for every gram of propane that flows through the burner, what volume of air is needed to burn it completely? assume that the temperature of the burner is 195.0°c, the pressure is 1.05 atm, and the mole fraction of o2 in air is 0.210.

Answers: 2

Answer

You know the right answer?

1. draw a bar magnet as a magnetic dipole consisting of two magnetic monopoles of. label each monopo...

Questions