Asimply supported wood beam of rectangular cross section and span length 1.2 m carries a concentrated load p at midspan in addition to its own weight (see gure). the cross section has width 140 mm and height 240 mm. the weight density of the wood is 5.4 kn/m3 . calculate the maximum permissible value of the load p if (a) the allowable bending stress is 8.5 mpa and (b) the allowable shear stress is 0.8 mpa.

Fft review: linspace, fs, fftshift, nfft 1. generate one second of a cosine of w,-10hz sampled at f, = 100hz and assign it to x. define a tt as your time axis 2. take 64 points fft. 3. as you remember, the dft (which the fft implements) computes n samples of s2t where k-0,1,2, n -1. plot the magnitude of this 64-points fft at range 0 to 63, what do you think of this graph? 4â·to get the x-axis into a hz-frequency form, plot this 64-points fft between-50 to 50 (the 100hz sampling rate) and have n-points between them. 5. according to your figure, what frequency is this cosine wave at? 6. remember that the fft is evaluating from 0 to 2ď€. we are used to viewing graphs from-ď€ to ď€. therefore, you need to shift your graph. 7. now according to your shifted graph. what frequency is this at? 8. note that the spikes have long drop-offs? try a 1024-point dft. note that the peak is closer to 10 and the drop-off is quicker. although, now sidelobes are an issue

Awoman stands a distance d from a loud motor that emits sound uniformly in all directions. the sound intensity at her position is an uncomfortable 2.0×10-3 w/m2. at a distance 2.6 times as far from the motor, what are (a) the sound intensity and (b) the sound intensity level relative to the threshold of hearing?

An inclined plane wrapped around a metal shaft is a a. lever b. screw c. pulley d. wedge