subject
Physics, 27.11.2019 04:31 netflixacc0107

As a new electrical technician, you are designing a large solenoid to produce a uniform 0.150-t magnetic field near the center of the solenoid. you have enough wire for 3100 circular turns. this solenoid must be 57.0 cm long and 7.00 cm in diameter. what current will you need to produce the necessary field?

ansver
Answers: 1

Another question on Physics

question
Physics, 22.06.2019 06:20
Clothing made of several thin layers of fabric with trapped air in between, often called ski clothing, is commonly used in cold climates because it is light, fashionable, and a very effective thermal insulator. so it is no surprise that such clothing has largely replaced thickand heavy old-fashioned coats. (a) consider a jacket made of five layers of 0.1-mm-thick synthetic fabric (k = 0.13 w/m·°c) with 1.5-mm-thick air space (k = 0.026 w/m·°c) between the layers. assuming the inner surface temperature of the jacket to be 28°c and the surface area to be 1.25 m2, determine the rate of heat loss through the jacket when the temperature of the outdoors is 0°c and the heat transfer coefficient at the outer surface is 25 w/m2·°c. (b) what would your response be if the jacket is made of a single layer of 0.5-mm-thick synthetic fabric? what should be the thickness of a wool fabric (k = 0.035 w/m·°c) if the person is to achieve the same level of thermal comfort wearing a thick wool coat instead of a five-layer ski jacket?
Answers: 1
question
Physics, 22.06.2019 08:00
5g of ammonium nitrate was dissolved in 60g of water in an insulated container. the temperature at the start of the reaction was 23.0°c and at the end it was 19.0°c. calculate the energy absorbed by the reaction.
Answers: 3
question
Physics, 22.06.2019 15:40
If two parallel light rays hit a mirror, they will not be parallel to each other after they reflect.
Answers: 1
question
Physics, 22.06.2019 17:30
Asilver dollar is dropped from the top of a building that is 1324 feet tall. use the position function below for free-falling objects. s(t) = −16t2 + v0t + s0 (a) determine the position and velocity functions for the coin. s(t) = v(t) = (b) determine the average velocity on the interval [1, 2]. ft/s (c) find the instantaneous velocities when t = 1 second and t = 2 seconds. v(1) = ft/s v(2) = ft/s (d) find the time required for the coin to reach the ground level. (round your answer to three decimal places.) t = s (e) find the velocity of the coin at impact. (round your answer to three decimal places.) ft/s
Answers: 3
You know the right answer?
As a new electrical technician, you are designing a large solenoid to produce a uniform 0.150-t magn...
Questions
question
Mathematics, 22.05.2021 17:10
question
Spanish, 22.05.2021 17:10
question
Computers and Technology, 22.05.2021 17:20
Questions on the website: 13722359