subject
Physics, 28.11.2019 06:31 katiebreon6193

A55 kg rock climber is in a lie-back climb along a fissure, with hands pulling on one side of the fissure and feet pressed against the opposite side. the fissure has width w = 0.25 m, and the center of mass of the climber is a horizontal distance d = 0.41 m from the fissure. the coefficient of static friction between hands and rock, μhands, is 0.34, and between boots and rock, μboots is 1.10.a. what is the least horizontal pull by the hands and push by the feet that will keep him stable? b. for this horizontal pull, what must be the vertical distance h between hands and feet? c. if the climber encounters wet rock; so that the coefficient of static friction between hands and rock, μhands, is 0.18, and between boots and rock, μboots is 0.80. what is the least horizontal pull by the hands and push by the feet that will keep him stable? d. for this horizontal pull, what must be the vertical distance h between hands and feet

ansver
Answers: 3

Another question on Physics

question
Physics, 22.06.2019 09:00
Inside of a windmill or a dam is a that is used to transform one type of energy into electrical energy. a. motor b. generator c. transformer d. power pack
Answers: 2
question
Physics, 22.06.2019 13:00
At a certain instant after jumping from the airplane a, a skydiver b is in the position shown and has reached a terminal (constant) speed vb = 52 m/s. the airplane has the same constant speed va = 52 m/s, and after a period of level flight is just beginning to follow the circular path shown of radius ρa = 2330 m. (a) determine the velocity and acceleration of the airplane relative to the skydiver. (b) determine the time rate of change of the speed vr of the airplane and the radius of curvature ρr of its path, both as observed by the nonrotating skydiver.
Answers: 3
question
Physics, 22.06.2019 15:10
Auniform crate c with mass mc is being transported to the left by a forklift with a constant speed v1. what is the magnitude of the angular momentum of the crate about point a, that is, the point of contact between the front tire of the forklift and the ground
Answers: 3
question
Physics, 23.06.2019 00:40
Asteel tube (k=50 w/mk) of inner and outer diameter di = 20mm and do=26mm, respectively, is used to transfer heat from hot gases flowing over the tube (h-hot = 200w/m2k) to cold water flowing through the tube (h-cold = 8000 w/m2k). what is the cold-side overall heat transfer coefficient uc? to enhance heat transfer 16 straight fins of rectangular profile are installed longitudinally along the outer surface of the tube. the fins are equally spaced around the circumference of the tube, each having a thickness of 2mm and a length of 15mm. what is the corresponding overall heat transfer coefficient uc? *solve for uc in both cases*
Answers: 1
You know the right answer?
A55 kg rock climber is in a lie-back climb along a fissure, with hands pulling on one side of the fi...
Questions
question
Mathematics, 15.01.2020 05:31
question
Mathematics, 15.01.2020 05:31
question
History, 15.01.2020 05:31
Questions on the website: 13722363