A2100 kg truck is traveling east through an intersection at 2.0m/s when it is hit simultaneously from the side and the rear. (some people have all the luck! ) one car is a 1200 kg compact traveling north at 5.0m/s. the other is a 1500 kg midsize traveling east at 10m/s. the three vehicles become entangled and slide as one body.
a. what is their speed just after the collision?
b. what is their direction just after the collision?

Clothing made of several thin layers of fabric with trapped air in between, often called ski clothing, is commonly used in cold climates because it is light, fashionable, and a very effective thermal insulator. so it is no surprise that such clothing has largely replaced thickand heavy old-fashioned coats. (a) consider a jacket made of five layers of 0.1-mm-thick synthetic fabric (k = 0.13 w/m·°c) with 1.5-mm-thick air space (k = 0.026 w/m·°c) between the layers. assuming the inner surface temperature of the jacket to be 28°c and the surface area to be 1.25 m2, determine the rate of heat loss through the jacket when the temperature of the outdoors is 0°c and the heat transfer coefficient at the outer surface is 25 w/m2·°c. (b) what would your response be if the jacket is made of a single layer of 0.5-mm-thick synthetic fabric? what should be the thickness of a wool fabric (k = 0.035 w/m·°c) if the person is to achieve the same level of thermal comfort wearing a thick wool coat instead of a five-layer ski jacket?

The chart shows the costs and shipping times for materials that a company needs to build a new product. which describes the best trade-off if the company needs to start building their product within the next two years? they should order the domestic materials because it is always best to choose the fastest shipping time. they should order the imported materials because it is always best to choose the lowest cost for materials. since the shipping time is longer, they should order the domestic materials because the additional cost is worth it to get the materials in time. even though the shipping time is longer, they should order the imported materials because they are less expensive and should arrive in plenty of time to build the product.

Materials will have different energies associated with the electrons inside them. this is related to how strongly bound they are by their work function. if we sandwich a material with a very low energy between two materials with a high energy, we create a trap for an electron. if this trap is very narrow in one direction in comparison to the others, this is approximately a 1-dimensional box that confines the electron. what is the lowest energy of an electron in the box if the thinnest direction across the materials is 4.81 nm?