Physics, 06.12.2019 01:31 cottoncandy465

Block 1 has mass m1= 460 g, block 2 has mass m2= 500 g, and the pulley, which is mounted on a horizontal axle with negligible friction, has radius r= 5.00 cm. when released fromrest, block 2 falls 0.750 m in 5.00 s without the cord slipping on the pulley.

Answers: 3

Show answers

Answers

Answer from: jjdj5218

a. a=0.06m/s^2

b. T1 = 4.62N

c. T2 = 4.97N

d. $\alpha=1.20rad/s^2$

e. I = 0.0146 kg.m^2

Explanation:

This question is incomplete. The original question was:

Block 1 has a mass m1 = 460 g, block 2 has mass m2 = 500 g, and the pulley, which is mounted on a horizontal axle with negligible friction,

has radius R = 5.00 cm. When released from rest, block 2 falls 0.750 m in 5.00 s without the cord slipping on the pulley.

(Do not treat the pulley as a uniform disk. Give your answers to three significant figures. Use these rounded values in subsequent calculations.)

a. What is the magnitude of the acceleration of the blocks?

b. What is the tension in the rope on block 1?

c. What is the tension in the rope on block 2?

d. What is the magnitude of the pulley's angular acceleration?

e. What is the rotational inertia?

We will use kinematics to calculate the acceleration of the blocks:

Y=Vo*t-1/2*a*t^2

Where Y=-0.75m; Vo = 0m/s; t = 5.00s

Solving for a:

a=-0.06m/s^2 The magnitude of the acceleration is and the acceleration of each block is

a1=0.06m/s^2 ; a2=-0.06m/s^2

By making a sum of forces on the block 1:

T1-m1*g=m1*a1 Solving for T1 and using g=10m/s^2 :

T1 = 4.62N

By making a sum of forces on the block 2:

T2-m2*g=m2*a2 Solving for T2 and using g=10m/s^2 :

T2 = 4.97N

Angular acceleration is given by:

$\alpha=a/R=1.2rad/s^2$

By making a sum of torques on the pulley, we get the inertia:

$T1*R-T2*R=-I*\alpha$ Solving for I:

$I=\frac{-R*(T1-T2)}{\alpha}$

I=0.0146kg.m^2

Answer from: leahandmaryssa

a) $\rm a_1 = 0.06\;m/sec^2\;\;and \;\; a_2 = - 0.06\;m/sec^2$

b) $\rm T_1 = 4.62\;N$

c) $\rm T_2 = 4.97\;N$

d) $\rm \alpha = 1.2 \;rad/sec^2$

e) $\rm I = 0.0146\;Kg.m^2$

Given :

Mass, $\rm m_1 = 460\;g$

Mass, $\rm m_2 = 500\;g$

Radius, R = 5 cm

When released from rest, block 2 falls 0.750 m in 5 sec without the cord slipping on the pulley.

Solution :

We know that,

$\rm S = ut + \dfrac{1}{2}at^2$

Now put the values of u, S and t and solve for a we get,

$\rm -0.75 = 0 +\dfrac{1}{2}a(5^2)$

$\rm a = -0.06\;m/sec^2$

So, acceleration of each block is,

$\rm a_1 = 0.06\;m/sec^2\;\;and \;\; a_2 = - 0.06\;m/sec^2$

Now for block 1,

$\rm T_1-m_1g = m_1a_1$ ----- (1)

Now put the values of $\rm a_1,\;m_1\;and\;g$ in equation (1),

$\rm T_1 = 4.62\;N$

Now for block 2,

$\rm T_2-m_2g = m_2a_2$ ----- (2)

Now put the values of $\rm a_2,\;m_2\;and\;g$ in equation (2),

$\rm T_2 = 4.97\;N$

Now for angular acceleration,

$\rm \alpha = \dfrac{a}{R}$

$\rm \alpha = 1.2 \;rad/sec^2$

Now sum of torques on the pulley is,

$\rm T_1R-T_2R = -I\alpha$

$\rm I = \dfrac{R(T_2-T_1)}{\alpha }$

$\rm I = 0.0146\;Kg.m^2$

For more information, refer the link given below

link

Answer from: Quest

here are some information of the future of geothermal energy:

-the future of geothermal energy can pretty much be summed up with a single word: more

-scientists plan in going deeper than 120 meters

-we are hoping that one day, we will get all of our energy from renewable energy sources such as geothermal energy

hope this !

Answer from: Quest

Uncle grandma

Another question on Physics

Physics, 22.06.2019 05:30

The volume of a gas is halved during an adiabatic compression that increases the pressure by a factor of 2.5. what is the specific heat ratio? show the math steps .

Answers: 3

Answer

Physics, 22.06.2019 10:10

What is special about a dc circuit ?

Answers: 3

Answer

Physics, 22.06.2019 11:20

If the radius of curvature of the cornea is 0.75 cm when the eye is focusing on an object 36.0 cm from the cornea vertex and the indexes of refraction are as described before, what is the distance from the cornea vertex to the retina? express your answer to two significant

Answers: 3

Answer

Physics, 22.06.2019 23:30

Avector a⃗ has a length of 8.6 m and points in the negative x direction. find the x component of the vector −3.7a⃗ .

Answers: 1

Answer

You know the right answer?

Block 1 has mass m1= 460 g, block 2 has mass m2= 500 g, and the pulley, which is mounted on a horizo...

Questions